EMC Test Equipment

EMC Test Equipment Test Equipment

• 

  Schwarzbeck FMZB 1513 Active Receive Loop Antenna

  SKU: 30113

  Applications: Antenna Pattern Measurement

  Test Standards: CISPR, MIL, FCC Part 15, ISO, ETSI

  Additional Test Standards: EN, ANSI

  Frequency Range: 9 kHz - 30 MHz

  Connector: 50 Ω N-Type (f)

  Typically In Stock

  VIEW PRODUCT Cart

• 

  1.2 GHz - 1.4 GHz Automotive 600 V/m Radar Pulse Test Solution

  SKU: sku-1079

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133

  SKU: 11050

  Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2

  Applications: EMC Surge, CE Marking, Surge Immunity

  Max EUT AC Voltage (W/ Built In CDN): 690 Volts

  Max EUT AC Current (W/ Built In CDN): 32 Amps

  Max EUT DC Voltage (W/ Built In CDN): 270 Volts

  Cost New:

  Was:

  Price Now:

  $5,975.00

  1 System Left

• 

  Amplifier Research 50W1000B 1 MHz - 1 GHz RF Power Amplifier

  SKU: 10922

  Frequency Range: 1 MHz - 1 GHz

  Output Power: 50 W

  Flatness: ±1.0 dB typical, ±1.5 dB maximum

  Gain: 47 dB minimum (at max setting)

  Imput Impedance: 50 ohms, VSWR 2.0:1 maximum

  Cost New:

  Was:

  Price Now:

  $695.00

  In Stock

  ORDERING OPTIONS

• 

  Fischer FCC F-120-6A BCI Injection Test Probe

  SKU: 11811

  Aperture: 40 mm

  Connector type: Type-N

  Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

  Frequency Range: 10 kHz – 400 MHz

  Input Power: 200 watts

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Thermo Keytek E510A 10kV Surge Generator

  SKU: 10799

  Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5

  Phase synchronization: ±15° with optional coupler/decoupler

  Pulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%

  Pulse repetition: 1 shot/18 seconds

  Pulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt steps

  Typically In Stock

  VIEW PRODUCT Cart

• 

  AH Systems TDS-535 Tuned Dipole Set, 25 MHz to 1 GHz, Receive and Transmit

  SKU: 10742

  Weight: 19 lbs.

  Antennas: Dipole Antennas

  Application/Test Type: precise EMI measurements

  Connector: N-type (female)

  Dimensions: Antenna Case: 28” x 23” x 7”

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Amplifier Research 50T4G18, 50 Watts CW, 4.2–18GHz, (TWT) Microwave Amplifier

  SKU: sku-717

  Weight: 70 lbs, 32 kg

  Dimensions: 19.8 x 6.5 x 27 in., 50.3 x 16.5 x 68.6 cm.

  Flatness: ±10 dB maximum, 4.2 - 18 GHz

  Frequency Range: 4.2–18GHz

  Gain: GAIN (at maximum setting) ......47 dB minimum GAIN ADJUSTMENT (continuous range)......35 dB minimum

  VIEW PRODUCT Cart

• 

  3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

  SKU: 10621

  Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

  Cable Diameter: up to 40 mm (1.57 in)

  Coupling Length: 1 m (39.4 in)

  Dimensions: 1040x140x110mm

  EFT Coupling Clamps: as per IEC 61000-4-4

  4 to 6 Weeks

  VIEW PRODUCT Cart

• 

  Haefely PSURGE 4010 Combination Wave Generator

  SKU: 10574

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: Internal Single Phase/16 Amps at 264 VAC and 110 VDC -(expandable to 3-Phase with external module); 18uF and 9uF+10 Ω acc. to IEC 61000-4-5

  Polarity: positive, negative, alternating

  Pulse current (short circuit): 100 Amps to 2.1 kA

  Pulse repetition: up to 12 per minute

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Com-Power AM-741R Active Monopole Antenna with RAI-100, 9 kHz - 60 MHz

  SKU: 3525

  Weight: 9.5 lbs. [4.3 kg]

  Antenna Factor (1 Meter): ±0.5 dB

  Antennas: Monopole Antennas

  Application/Test Type: radiated emissions measurements, typically below 30 MHz.

  Connector: BNC (female)

  Cost New:

  Was:

  Price Now:

  $299.99 - $4,325.00

  In Stock

  ORDERING OPTIONS

• 

  Com-Power CGC-255E Comb Generator 50 kHz - 400 MHz in 50 kHz/250 kHz steps

  SKU: 11431

  Weight: 1 lbs / 0.5 kg

  AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz

  Application/Test Type: Reference Signal Source for LISN verification

  Battery: 6V NiMH, 1 Ah

  Dimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm

  Inquire for Availability

  VIEW PRODUCT Cart