$2,495.00
EMC Test Equipment Categories
EMC Test Equipment Test Equipment, Systems & Solutions
-
-
Com-Power CDN-M325E 150 kHz - 230 MHz 3-Line RF Coupling Decoupling Network
SKU: 4845
EMC Standard: IEC/EN 61000-4-6Application/Test Type: Three conductor power cableAssociated Equipment: RF Conducted Immunity Test SystemsCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)Typically In Stock -
Teseq CDNE M310 Coupling/Decoupling Network for Emission Measurement, 10 A, 30 to 300 MHz
SKU: sku-87
Weight: 700 grams (1.5 LB.'s)Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency rangeCommon Mode Impedance: Common mode impedance (EUT port): 150 Ω +10/-20 ΩCurrent Rating: 10 AmpsDecoupling of Common Mode Disturbance: Greater than 30 dB -
Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
SKU: sku-86
Weight: 700 grams (1.5 LB.'s)Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.Common Mode Impedance: 150 Ω +10/-20 ΩCurrent Rating: 10 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dB -
$3,025.00 -
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2
SKU: 10058
Weight: 70 kg (154 pounds)Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobilityFrequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeInquire for Availability -
Com-Power CDN-M225E Coupling Decoupling Network for Unscreened Power Supply Lines
SKU: sku-54
Weight: 5 lbs. 2.3 kgApplication/Test Type: two conductor power cableCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE) -
Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator
SKU: 10045
Test Standards: IEC/EN 61000-4-8Antennas: Teseq INA 701, 702 or 703Compatible Generators: Teseq NSG 3040 and NSG 3060 -
Teseq MFO 6501 Manual Power Line Frequency Magnetic Field Generator
SKU: 10043
Test Standards: IEC 61000-4-8Antennas: Teseq INA 701, 702 or 703Test Frequency: Selectable 50 Hz and 60 Hz ±3%Magnetic Field Levels: Antenna Dependent$195.00 - $1,095.00Inquire for Availability -
Teseq INA 703 Magnetic Field Coil for NSG 3040 & NSG 3060
SKU: 10042
Test Standards: IEC 61000-4-8# of turns: 1, 5, 37Dimensions: Coil Size: 1 x 1 m, Homogeneous field volume: 60 x 60 x 50 cmMounting Base: Rigid aluminum frame with castersRF Connector: 4 pole connector (INA 3250)$129.00 - $495.00Typically In Stock -
Teseq MD 103 1 Ohm Current ESD Pulse Target
SKU: 10035
Resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm loadFrequency Range: DC - 4 GHzGrounding Plane & Cal Setup: Avaialble at ESDGuns.com$450.00 - $2,950.00Typically In Stock -
PMM 9010
SKU: 11026
Frequency Range: 10 Hz - 30 MHzApplications: Conducted EmissionsTest Standards: CISPR 14, CISPR 16-1-1$495.00 - $5,500.00In Stock