APREL WTT-127A Compact Chamber

Online Orders Ship Same Day

 

SKU:
sku-1594

 

This product is available for shipping to North America and Western European countries.


Getting Started...

Check out our Google Reviews

Overview

Mobile Chamber APREL offers two concepts of compact chambers:

  • Mobile Shield is an add-on option for use with the standard size EM-ISight automated test system. It is designed to provide isolation from ambient noise sourses that may be detected by the system during a measurement process. Features include an automated door operated by push button, multiple pass through filter options (including HDMI, LAN, K-Type) and sizes.

  • Wireless Throughput Tester is a small form-factor anechoic chamber designed to test over the air and conducted performance of a WiFi Access Point operating on 802.11a/b/g/n/ac. Shipped fully integrated with a built-in turntable and 2 isolation shield enclosures for Client Access Point (2.5 GHz & 5 GHz), programmable attenuator and required filters. Delivered fully operational the system can be in operation within hours of unpacking.

Both solusions are compact, mobile, and an inexpensive alternative to conventional anechoic chambers.

WTT?127A Wireless Throughput Tester is a small form?factor low cost anechoic chamber that comes fully integrated with a built?in turntable, 2 isolation shield enclosures for Client AP (2.5G & 5GHz), signal interference filters, programmable RF attenuators and an OTA (over the air) conduction port. The solution is shipped ready to test throughput in both Over The Air & Conductive modes with flexibility to perform other wireless performance parametric testing.

The WTT?127A is a compact and inexpensive alternative to conventional anechoic chambers. It is delivered ready to use and tests throughput vs range simulating realistic use conditions. Software controls the test applications including wireless path loss data throughput. The WTT?127A assists in the development of WiFi solutions, provides QA engineers with a method of validation and shortens the development cycle through improved test productivity.

MAIN APPLICATIONS

  • Wireless Access Point, Wireless Devices (IEEE802.11,a/ac/b/g/n WiFi device)
  • WiFi-AP Over the air Throughput testing -2.5GHz, 5GHz and 2.5+5GHz Combined Model
  • WiFi-AP Conductive throughput testing -2.5GHz, 5GHz and 2.5+5GHz Combined Model
  • Wireless Device Throughput Measurements - 2.5GHz, 5GHz and 2.5+5GHz Combined Model

KEY FEATURES

  • 2GHz – 6 GHz Frequency Range (upgrade size of enclosure for lower frequency of 700MHz)
  • Capable of Performing: OTA & Conductive Throughput Measurements
  • Shield Isolation > 100 dB Typical (EUT test chamber & Client AP shield Box). Total isolation with selected I/O filter connected condition > -65 to -85dB (frequency dependent)
  • 80 cm Signal Path Length (Receiving Antenna to EUT antenna standard solution)
  • DUT Turntable (Positioner): 0-360 ° 1 ° steps
  • User Selectable I/O Ports: Standard equipped solution includes 8 SMA Connectors, 2 LAN (giga port) connectors, RS-232, AC Power filter and Air-flow honey comb vent & Cooling Fan
  • Equipped Dual Band Antennas (2.5G & 5GHz) x 4 (supports IEEE802.11,a/ac/b/g/n)
  • ETF-198 programmable RF attenuator (box) with OTA & conduction port. Path loss table factors included, Attenuation - Range: 0 to -135db, Attenuation - Resolution: 1db/ step
  • Operates with IxChariot throughput measurement Software (customer to source) Client AP (2.5GHz & 5GHz) --(customer to source)
  • Compatible with any client AP (allows for easier set up and TCP/IP changes)
  • User friendly GUI with test adaptable operation setting to speed up test process, includes automated report output
  • Faster test time compared to other similar systems
  • System setup performed by installation engineer along with user training within 1 day
  • Freestanding mobile cart configuration for easy set up, deployment and portability
  • Standard size: 1270mm (W) x 1200mm (L) x 1950mm (H)

WTT-127A SYSTEM SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Model Electrical (VAC) Frequency (Hz) Total Current
(Max)
Power Plug Type
WTT-127A 100 to 240 VAC 50/60 Hz 15 A NEMA 5-15P plug
AC Power line filter 100 to 240 VAC 50/60 Hz 9 A NEMA 5-16P plug
Turn Table (30 cm) 100 to 240 VAC 50/60 Hz 2A NEMA 5-16P plug
PHYSICAL SPECIFICATIONS
Length Width Height Weight
(nominal)
Test Volume 0.35 m 0.35 m 0.5 m Turntable Load < 5 kgs
Outside Dimensions 120 cm 127 cm 195 cm 450 kgs
EUT Chamber Dimensions 120 cm 127 cm 108 cm 280 kgs
AP Shield Box Dimension 60 cm 60 cm 35 cm 45 kgs x 2
Turn Table (30 cm) 30 cm 30 cm 20 cm 10 kgs
TECHNICAL SPECIFICATIONS
Model WiFi dual antenna frequency range Path length Positioners Shield performance
WTT-127A 2400 MHz to 2500MHz
5000MHzto 6000MHz
80 cm DUT Turntable x 1 0-360° > 100 dB 400 MHz to 18 GHz
Signal Filter isolation > 65db

WTT-127A AUTOMATED SYSTEM INTERFACE (I/O) LIST
Signal Filter / Interface
AC Power filter
(100-240V)
RJ-45 Filter
(10/100/1000)
RS-232 Filter Fan & Honey Comb SMA Connector
EUT Chamber 1 2 1 1 8
AP Shield Box (set/each) 1 1 0 1 4


Mobile Shield

The APREL Mobile Shield is an add-on option for use with the EM-ISight automated test system. This mobile shield is designed to allow for easy integration of the EM-Isight system so as to provide isolation from ambient noise sources that would normally be detected by the system. Features an automated door operated by the push of a button.

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.