Overview
The Tilting Device KE 2.5-R is especially designed for radiated measurements on devices under test at horizontal rotation axis. Different types of devices can be mounted onto the tilting plate made of Rohacell.
Clamping bolts, made of Rohacell, are integrated on the tilting plate which allows the fixing and adjustment of cables.
The Tilting Device, with the exception of the pneumatic rotary actuator, is completely fabricated from plastic, mainly Rohacell, with a very low dielectric constant εr.
Polarisation occurs using compressed air. A solenoid valve located outside of the chamber regulates the compressed air flow.
The IEEE 488.2 (GPIB) bus provides an additional control option for all functions, when operated with the SCU/MCU or NCD Controller.
| Technical Data | |
| Height of rotation axis | 325 mm (above base plate) |
| Load capability | 2.5 kg |
| Dimensions tilting plate (L x W) | 500 x 300 mm |
| Material tilting plate | Rohacell (incl. mounting holes) |
| Dielectric constant εr at 1 MHz | 1.1 |
| Dimensions tilting device (L x W x H) | 800 x 400 x 375 mm |
| Material tilting device | Plastic with low dielectric constant |
| Feed-trough in rotation axis for cables | Ø 40 mm |
| Polarisation | 0°/90° (vert./hor.) |
| Polarisation time 0°/90° | approx. 3 sec |
| Drive via | non- metallic toothed belt |
| Polarisation drive | Pneumatic rotary actuator |
| Control | Solenoid valve |
| Pressure | max. 6 bar |
| Current consumption (outside chamber) | max. 2 A |
| Voltage | 208-230 VAC, 50/60 Hz, single phase |
| Temperature range | +10°C to +35°C |
| Total weight | 15 kg |
| Accessories | Interface to SCU/MCU/NCD Controller 2x 15 m air hose Service unit outside the chamber Service manual |
