Overview
The turntable TT 1.5 WF is especially designed for freestanding installation on surface floor in electromagnetic absorption chambers. The carrier plate is made of waterproof, laminated and lacquered wood. A 285 mm diameter opening in the centre of the turntable provides the capability to insert power supply for testing.
The IEEE 488.2 (GPIB) bus provides an additional control option for all functions, when operated with the SCU/MCU or NCD Controller.
Information presented enclosed is subject to change as product enhancements are made regularly. Pictures included are for illustration purposes only and do not represent all possible configurations.
[split]
| Specifications | |
| Diameter | 1.5 m |
| Permissible load | 500 kg |
| Point load | 100 kg (at area of 10cm x 10cm) |
| Height | 140 mm |
| Material carrier plate | Laminated wood |
| Rotating speed adjustable between | 0.3 to 2.5 rpm |
| Rotating angle | +400°/-200° |
| Positioning accuracy | +/- 0.5° |
| Motor | Brushless DC motor 200 W |
| Interference suppression | 20 dB under limits EN 55022 class B |
| Turntable drive | Toothed belt drive (non-metallic) |
| Control cable | Fibre optic lines |
| Remote control via | IEEE interface |
| Current consumption | max. 2 A |
| Voltage | 208-230 VAC, 50/60 Hz, single phase |
| Temperature range | +10°C to +35°C |
| Total weight | approx. 95 kg |
| Accessories | Interface to SCU/MCU/NCD Controller 1.5 m power supply cable Service manualg |
