Overview
The turntable TT 2.0 SI is especially designed for flush mounted installation in semi anechoic electromagnetic absorption chambers. The carrier plate is made of stainless steel. A 285 mm diameter opening in the centre of the turntable provides the capability to insert power supply for testing.
The IEEE 488.2 (GPIB) bus provides an additional control option for all functions, when operated with the SCU/MCU or NCD Controller.
[split]
| Specifications | |
| Diameter | 2.0 m |
| Permissible load | 1000 kg |
| Point load | 250 kg (at area of 10cm x 10cm) |
| Height | 130 mm |
| Material carrier plate | Stainless steel |
| Rotating speed adjustable between | 0.3 to 2.5 rpm |
| Rotating angle | +400°/-200° |
| Positioning accuracy | +/- 0.5° |
| Motor | Brushless DC motor 200 W |
| Interference suppression | 20 dB under limits EN 55022 class B |
| Turntable drive | Toothed belt drive, worm gear |
| Control cable | Fibre optic lines |
| Remote control via | IEEE interface |
| Current consumption | max. 2 A |
| Voltage | 208-230 VAC, 50/60 Hz, single phase |
| Concentricity tolerance | +/- 3 mm |
| Elevation tolerance less tha | 5 mm |
| Ground plane connecting every | 50 mm |
| Square border interface (Easy fitting into Groundplane of chamber) | 2.3 m x 2.3 m |
| Temperature range | +10°C to +35°C |
| Total weight | approx. 380 kg |
| Accessories | Interface to SCU/MCU/NCD Controller 1.5 m power supply cable Service manual |
