SS8G-200 2 - 8 GHz, 200 Watt Solid State RF Power Amplifier

SS8G-200 2 - 8 GHz, 200 Watt Solid State RF Power Amplifier

Weight:
40kg (88.1 lbs)
Dimensions:
430 x 221 X 560 mm
Flatness:
±4.0 dB Max
Frequency Range:
2 GHz - 8 GHz
Gain:
53 dB minimum
Impedance:
50 ohms
Input:
180-240 VAC, 2500 watts
RF Connector:
Type N female
Online Orders Ship Same Day

 

Availability:

IN STOCK

SKU:
sku-2126

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

SS8G-200 Overview

The SS8G-200 is a solid state high RF power amplifier that operates from 2 GHz to 8 GHz. This Class AB GaN amplifier can provide over 200 watts of output power with a gain of 53 dB.

The RF amplifier has 2-Tone Intermodulation of greater than 30 dBc and Harmonics greater than 20 dBc. It requires a 180 - 240 AC voltage to operate. The amplifier can be used with a wide range of modulation standards and has built-in protection circuits and therefore provides high reliability.

 

Interface

  1. ONLINE/STANDYBY: HPA ON/OFF.
  2. Watt/dBm: OUTPUT POWER UNIT.
  3. TABLE: HPA State Table.
  4. ALC: Auto Level Control.
  5. FAULT: Display alarm messages.
  6. COMM: Set the communication method.
  7. Display Forward Output Power dBm or W.
  8. Output Power Unit dBm or W.
  9. Display Reflected Output Power dBm or W.
  10. Display VSWR Value.
  11. Display Fault or Clear State.
  12. Display Standby or Online State.
  13. Display Output Power Average or Peak.

Touch Screen on SS8G-200 2-8 GHz, 200 Watt Solid State RF Power Amplifer

SS8G-200 Key Considerations

Weight:
40kg (88.1 lbs)
Dimensions:
430 x 221 X 560 mm
Flatness:
±4.0 dB Max
Frequency Range:
2 GHz - 8 GHz
Gain:
53 dB minimum
Impedance:
50 ohms
Input:
180-240 VAC, 2500 watts
RF Connector:
Type N female

Related EMC Equipment & Solutions

SS18G-150 6 GHz - 18 GHz Solid State RF Amplifier for 200 V/m

SS18G-150 6 GHz - 18 GHz Solid State RF Amplifier for 200 V/m

SKU: 9568

Applications: Military & Aerospace Radiated Susceptibility, Radar/Pulse
Field Strength Levels ( at 1 meter ): 500 V/m CW
Amplifier Class: A-Linear
Frequency Range: 6 - 18 GHz
Gain: 56 dB Typical
Rated Power: 150 Watts
Max RF Input Power: 1 mW (0 dBm)
AC Input: 220 V (2.8kVA)
Connector type: N(f)
Typically In Stock
View Product Cart
Amplifier Research 200T4G8 200 Watt Amplifier, 4 - 8 GHz

Amplifier Research 200T4G8 200 Watt Amplifier, 4 - 8 GHz

SKU: sku-436

Flatness: ±6 dB maximum at rated power
Frequency Range: 4-8 GHz instantaneously
Gain: Max Range: 53 dB; Continous Range: 35 dB
Impedance: 50 ohms, VSWR 2.0:1 maximum
Output: Nominal: 262 watts Minimum: 200 watts Linear @ 1 dB Compression: 100 watts minimum
RF Connector: Type N female
RF Input Voltage: 1.0 milliwatt maximum for rated output
View Product View Product
Refurbished Logimetrics A600/C 4 to 8 GHz, 200 Watt TWT RF Amplifier

Refurbished Logimetrics A600/C 4 to 8 GHz, 200 Watt TWT RF Amplifier

SKU: sku-1055

Frequency range: 4.0 GHz - 8.0 GHz
Gain: 40 dB
Impedance: 50 ohms, VSWR 2.5:1 maximum
Input Connector: Type "N" to 8 GHz, Type "SMA" above 8 GHz
Input/Output Impedance: 50 ohms, VSWR 2.5:1 maximum
Max NF: 37 dB
Min. Power: 200 W
Output Connector: Type "N" to 8 GHz, Waveguide above 8 GHz
Power: 220 VAC, 50 to 60 Hz, 3-Phase, 2.6 kW.
Spurious AM Residual AM: At least 40 dB below rated output, typically 46 dB
View Product Cart
Amplifier Research 50U1000, 50 Watts CW, Class A Solid State RF Power Amplifier

Amplifier Research 50U1000, 50 Watts CW, Class A Solid State RF Power Amplifier

SKU: sku-715

Weight: With Cabinet 17.7 kg (41 lbs) Without Cabinet 9.5 kg (23 lbs)
Dimensions: With cabinet: 50.3 x 15.5 x 55.1 cm (19.8 x 6.1 x 21.7 in) Without Cabinet: 48.3 x 13.2 x 55.1 cm (19 x 5.2 x 21.7 in)
Flatness: ± 1.5 dB
Frequency Range: 10kHz-1000MHz
Gain: GAIN (at maximum setting): 47 dB minimum GAIN ADJUSTMENT (Continuous Range) : 20 dB minimum
Impedance: 50 ohms
Input: PRIMARY POWER (Universal; selected automatically): 100-240 VAC, 50/60Hz, 250 watts
Output: POWER OUTPUT @ 3dB COMPRESSION: Typical: 70 watts, Minimum: 50 watts POWER OUTPUT @ 1dB COMPRESSION: Typical: 60 watts, Minimum: 45 watts
RF Connector: Type N female
RF Input Voltage: 1.0 milliwatt maximum for rated output
View Product View Product
Amplifier Research 20S1G4 Solid State RF Amplifier

Amplifier Research 20S1G4 Solid State RF Amplifier

SKU: sku-610

Weight: 37 lbs
Dimensions: 19.8 x 6.1 x 14.8 in
Flatness: ± 1.5 dB
Frequency Range: 0.7–4.2GHz instantaneously
Gain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimum
Harmonic Distortion (THD): Minus 20 dBc maximum at 15 watts
Impedance: 50 ohms, VSWR 2.0:1 maximum
Input: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximum
Output: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 watts
RF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45
RF Input Voltage: 1.0 milliwatt maximum for rated output
Standards Met: CE Mark Testing
Call for availability
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form