Test Application Categories
Test Application
-
EFT/Burst & ESD Rental Package for IEC 61000-4-2 and IEC 61000-4-4
SKU: sku-669
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 1 Hz to 2 MHzBurst time: 0.01 to 999 msCoupling: Built-in Single Phase 250 Volts AC / 110 Volts DC and 16 AmpsPolarity: positive, negative, alternating$1,595.00In Stock -
EM Test Automotive Test System for ISO 7637-2
SKU: 10596
ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NMicropulse: Micropulse module for test pulses 1, 2A and 6Inquire for availability -
3ctest PFS-A Series Voltage Interruption Simulator
SKU: 2686
DUT supply voltage: 0 to 80 VDUT supply current: 50 AmpsPeak current: 100A duration 500 msSwitching Time: ≤ 200ns (meets GM3172 9.2.18) And compatible with ≤ 1us (LV124, VW 80000, etc.)Fall Duration: 1us – 1 sIn Stock -
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864IN STOCK -
EM Test AutoWave for Generating and Recording Automotive Waveforms
SKU: 21477
Frequency Range: DC - 50 kHzSample Rate: 500 kS/s (1 ch)Output Channels: 2Output Voltage: 10 V, unipolar or bipolarVoltage: 10V, unipolar or bipolarNOT OFTEN -
ISO 11452-8 Magnetic Field Immunity Test System
SKU: 10463
Frequency Range: 15 Hz to 150 kHz.Normative References: ISO 11452-1, Road vehiclesOptional: Artificial NetworksMagnetic Field Strengths: up to 1,000 A/mInquire for Lead Time -
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing
SKU: 8250
Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV stepStandards Met: IEC 61000-4-2, ISO 10605Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VAContact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV stepTypically In Stock -
Teseq NSG 3040 Transient Immunity Test System
SKU: 4141
Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT Voltage (w/ Built in CDN): 264 VoltsMax EUT Current (w/ Built in CDN): 16 Amps$1,495.00In Stock -
SS400M4k EMC CS Power Amplifier 4 kHz to 400 MHz
SKU: 9159
RF Output Power: 75 - 250 WattsFrequency Range: 4 kHz - 400 MHz (Power derated from 4 - 9 kHz)Applications: Bulk Current Injection TestingMax Input Power: 0 dBmLoad VSWR: 100% mismatch tolerantTypically in Stock -
Chroma 19032 Guardian Electrical Safety Analyzer
SKU: 14100
Standards Met: IEC 60950, IEC 6134701, IEC 60065, IEC 60446, IEC 60601, IEC 61851Current Handling: Up to 20 Amps$495.00In Stock -
$550.00In Stock -
Langer EMV-Technik P11t Mini Burst Field Generator (B, Trigger)
SKU: 30043
Generator Voltage: 400 VExternal Trigger Input: SMB, male, jack; 5 V TTLRise Time: 1.8 ns - 10 nsApplications: Burst/EFT Testing, EMC Precompliance TestingTest Standards: 61000-4-4Typically in Stock