Normative References Categories
Normative References Test Equipment
-
Rent Radiated Emissions Test System Using GTEM
SKU: 0869
Frequency Range: 30 MHz - 40 GHzDUT Size: up to 2' cubed (GTEM 750)EMI Measurements: FCC Part 15, CISPR 11, MIL-STD-461 and moreApplications: EMC Precompliance Testing, CE Marking, Radiated Emissions Testing$1,290.00 - $4,700.00IN STOCK -
Pacific Power SmartSource 3150AFX Pre-Programmed AC & DC Power Supply
SKU: 30157
Applications: Conducted Immunity, Automotive EV EMCRated Power AC/DC Mode: 15 kVA, kW / 15 kWMax. Output Voltage: 333 (L-N) VAC / 425 VDCMax. AC/DC Current (2 & 3 phase mode): 41.7 Arms / 21.0 ADCMax. AC/DC Current (1 phase mode): 125 Arms / 62.5 AdcIn Stock -
Schwarzbeck FMZB 1519 C Active Magnetic Loop Antenna
SKU: 8581
Frequency Range: 9 kHz - 30 MHzAntenna Factor for fict. E - field strength: 20 dB/mAntenna Factor for H - field strength: -31.5 dB/ΩmLoop Diameter: 0.5 mFrequency Response: < +/- 1 dB$5,095.00Typically in Stock -
Haefely MAG 1000 AC Magnetic Field Generator per IEC 61000-4-8
SKU: 1897
Test Standards: IEC 61000-4-8Max Continuous Field Strength: 1 - 120 A/mShort Duration Levels: Up to 1000A/mTest Times: 1 min to 8 HoursIn Stock -
3ctest AutoLab Conducted Immunity Transient Software for Automotive Testing
SKU: 11836
System Requirements: Windows 7, Windows 8, Windows 10 and Windows 11Supported Communication Interfaces: USB, EthernetFeatures: Easy to Use GUI, Custom Waveform Generation, Remote Control, Test sequence and scheduling, ReportingIn Stock -
Narda PMM 7010 EMI Test Receiver
SKU: 10025
Frequency Range: 9 kHz to 3 GHzApp Note: Differences Between EMI Test Receivers and Spectrum Analyzers, Precompliance conducted emissions,Detectors: Peak, Quasi-Peak, Average, RMS, RMS-Avg (optional), C-Avg, Smart Detector functionPre-programmed Test Limits: CISPR 11, CISPR 22Sweep/Test Speed: Slow$495.00 - $2,375.00IN STOCK -
EMI-AK40G Antenna Kit for EMI Radiated Emissions & Immunity Testing
SKU: 12112
Frequency Range: 20 Hz to 40 GHzIncludes: Log, Biconical, Monopole, Passive Loop, Dual Ridge, Quad Ridge, Current ProbesTest Standards: FCC Part 15, MIL-STD-461, IEC 61000-6-3, IEC 61000-6-4Applications: EMC Precompliance Testing, Radiated Emissions, TEMPEST TestingIn Stock -
3cTest SEPN 38100T Surge/EFT 3 Phase Coupling Network
SKU: 7271
EUT Load Capacity (AC): 380V, 100 A, 50 Hz/60 Hz three-phase-five-wireEUT Load Capacity (DC): 450 V, 100 AFuse: 6 AMax Power Consumption: 200 WDimensions: 600 x 800 x 1830 mm (W x D x H) 23.6 x 31.5 x 72 inIn Stock -
Elektro-Automatik PS 11500-30 Programmable High Efficiency DC Power Supply 1500 V
SKU: 7287
Voltage range: 0-1500 VCurrent Range: 0 -30 AResistance Range: 1.7 Ω - 3000 ΩOutput Capacitance: 60 µFFrequency Range: 45 - 65 Hz$1,400.00 - $14,000.00In Stock -
Hioki 3470-02 Magnetic Field Meter, 10 Hz - 400 kHz
SKU: 12076
Frequency Range: 10 Hz - 400 kHzCompliance Standards: IEC62233 and EN 50366Magnetic Measurement Units: Select T (Tesla), G (Gauss) or A/mEMC Standards: EN/IEC 61000-4-8Inquire for Availability -
RESA Realtime EMC Spectrum Analyzer
SKU: 2075
Frequency Range: 9 kHz - 3.2/7.5/13.2/26.5 GHzFrequency Resolusion: 1 HzReal Time Bandwidth: 25 MHz (40 MHz Optional)Range: 0 Hz (Zero Span), 100 Hz to Max FrequencyEMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR 16-1-1)In Stock -
Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz
SKU: 11018
Frequency Range: 20 MHz - 18 GHzMeasurement Type: CW, AM & PulseField Strength Range: 2 – 1000 V/mDynamic Range: >54 dBIsotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHzInquire for Availability