Wavecontrol SMP2 Overview
**Please Note - These are not for sale or rent to private individuals**
The Wavecontrol SMP02 provides a full range of E-Field, H-Field and E&H Field probes covering different frequency ranges starting at 0 Hz and up to 60 GHz.Probes are plug and play and come with an individual ISO 17025 accredited calibration. All sensors are isotropic, RMS and highly accurate.
[split]
Wavecontrol SMP2 Included Accessories:
- SMP2 Reader PC Software
- SMP2 Carrying Case
- USB Cable
- AC/DC Charger
- Manual
- Calibration Certificate
Wavecontrol SMP2 Optional Accessories:
- SMP2 Reader PC Software
- SMP2 Carrying Case
- USB Cable
- AC/DC Charger
- Manual
- Calibration Certificate
Wavecontrol SMP2 E-Field Probes:
- WPT
- WPF3-HP 100kHz-3GHz, 0.2-1000 V/m RF electric field probe
- WPF6
- WPF8
- WPF18
- WPF40
- WPF60 Electric Field Probe, 1 MHz - 60 GHz
Wavecontrol SMP2 H- and E-Field Probes:
- WP400
- WP400-3
- WP400c
- WP50
Wavecontrol SMP2 H-Field Probes:
- WPH-DC
- WPH60 Magnetic Field Probe
- WPH1000
Wavecontrol SMP2 Applications:
- Measuring field strength in TEM cells and absorber chambers to demonstrate electromagnetic compatibility (EMC)
- Measuring and monitoring field strengths around broadcasting and radar equipment
- Measuring field strengths of cell phone transmitters and satellite communications systems to demonstrate compliance with human safety standard limit values
- Measuring field strengths in the industrial environment, such as plastics welding equipment, RF heating, tempering, and drying equipment
- Measurements for protecting users of diathermy equipment and other medical devices that generate high-frequency radiation
- Measuring field strengths as part of general safety regulations
- 3-in-1 Field Meter: spectrum analysis (DC – 400 kHz), broadband (DC - 60 GHz) and static field measurements.
- Real-time FFT-based spectrum analysis using digital processing.
- Weighted Peak Method (WPM) for automatic and real time comparison with limits.
- Special auto-gain function for peak detection (indispensable for procedures such as welding).
- Display of results in RMS and peak values.
- Function for time domain measurement of a specific frequency.
- Automatic field probe recognition.
- E&H field selection.
- Total field value and value for each component (X, Y, Z).
- Frequency SPAN selection.
- High Pass Filters at 1 Hz, 10 Hz, 25 Hz and 100 Hz.
- Max-hold function.
- Display of maximum, minimum and average values.
Wavecontrol SMP2 Features:
- Sliding window function according to standards.
- Spatial average function.
- Adjustable measurement time from 1s to 100 hours.
- Programmable measurement to start at a given time.
- Graphic display of broadband measurement changes over time.
- Adjustable graph display from 1 s to 12 minutes.
- Programmable alarm function.
- USB and fibre optics connection.
- Large storage capacity.
- Screen-shot function for reporting.
- PC software for control and reporting.
- Results can be uploaded automatically to a web-page control centre.
- Available in several languages.
