Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.IEC/EN Standards Categories
IEC/EN Standards Test Equipment
-
Surge4-5 Combo Wave Generator for IEC 61000-4-5 Testing
SKU: 11857
Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2, VDE 0847 4-5Applications: EMC Surge, CE MarkingBuilt in CDN Power Handling: 270 Volts and 16 AmpsCombination/Wave Surge Output Capability: 200 Volts to 4.4 kVExternal Coupling: Data Lines (Surge), 3PH EUTShips Same Day -
Schwarzbeck HHS 5210 Helmholtz Coil for IEC 61000-4-8
SKU: 8952
Number of Turns Per Coil: 10Max. Coil Current: 20 A, 5 minutesNominal Coil Current: 10 A, continuousMaximum Magnetic Field Strength: 300 A/m, 5 minutesNominal Magnetic Field Strength: 150 A/m, continuousIn Stock -
Schwarzbeck CMDM 8700 Common Mode / Differential Mode Switch
SKU: 11226
Frequency Range: 9 kHz – 30 MHzConnector: BNCImpedance of Line A, Line B and output port: 50 ΩVoltage division factor at the measuring port: (0 … - 2) dBTypically in Stock -
-
-
-
-
3ctest PFS Single Phase Power Fail Simulator
SKU: 21108
EUT max. Voltage: 55V - 300VEUT max. current: 6A - 55ADip Voltage & Variation Levels: 0% through 100%Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: EMC Precompliance Testing, Conducted Immunity4-6 Weeks -
LFCI4-16/19 Test Generator for Common and Differential Mode Disturbances
SKU: 11995
Test Standards: IEC 61000-4-16, IEC 61000-4-19Frequency Range: DC, 0.05Hz - 300 kHz; resolution 0.05 HzSlew Rate: 100 V/µsInternal Power Amplifier: 250 WattsTypically In Stock -
Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-921
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 Ohms -
Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network
SKU: 10827
Associated Equipment: RF Conducted Immunity Test SystemsApplication/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 16 AmpsDecoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB$195.00 - $495.00Typically In Stock -
Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A
SKU: sku-791
Application/Test Type: unscreened supply lines (mains) AC + DCCurrent Rating: 16A / 32A / 63 A / 100 ADimensions: 160 x 84,5 x 240mm or 200 x 122,5 x 400mm depending on modelFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: banana sockets