Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.IEC/EN Standards Categories
IEC/EN Standards Test Equipment
-
Schwarzbeck CMDM 8700 B Common Mode / Differential Mode Switch
SKU: 8564
Frequency Range: 9 kHz – 108 MHzConnector: BNCImpedance of Line A, Line B and output port: 50 ΩVoltage division factor at the measuring port: -20 dB +/-3 dBApplications: Radiated Emissions$2,775.00Typically in Stock -
VCP-FS Vertical Coupling Plane with Voltage Bleeding Cable
SKU: 4378
Standards Met: IEC 61000-4-2Applications: Conducted Immunity, Electrostatic Discharge Immunity TestVCP Aluminum Size: 50 x 50 cm / 19.7 x 19.7 inVoltage Bleeding Cable: Includes two 470kΩ resistorsHeight: 1.5m/4.9 ft or 2.25m/7.3 ftIn Stock -
3ctest EDS 10IC HBM/MM Electrostatic Discharge Simulator
SKU: 6980
Output Voltage: HBM 5~8000V 5%+5V; MM 5~1000V 5%+5VPolarity: Positive, Negative, AlternateTime Interval: 0.1 - 10s adjustableTrigger Mode: Automatic, single or external triggerPower Supply: AC100 ～ 240V +/-10% 50/60HzIN STOCK -
Typically In Stock -
CDN 418CAN Data & Control Line Coupling Decoupling Network
SKU: 55116
Coupled Waveform: Damping oscillation wave at 100 kHz/1 MHzPulse Voltage: ≥3 kVCoupling Mode: CAN H+CAN L simultaneous ground/LIN groundCommunication Frequency: <5 MHzData Rate: CAN 10MBit/s, LIN 100 KBit/sInquire for Availability -
SS6G-175 Radiated Immunity EMC Amplifier
SKU: 7250
Frequency Range: 1 GHz - 6 GHzGain: 54.8 / 58 ±3 (1 to 4 GHz), 53 / 56 ±3 (4 to 6 GHz)Harmonics: 20 dBcOutput Power: 300 Watts from 1 - 4 GHz, 200 Watts from 4 to 6 GHzWeight: 121 LbsTypically In Stock -
ETS-Lindgren 3142E Biconilog Antenna, 30 MHz - 6 GHz
SKU: 10814
Standards: IEC 61000-4-3, FMC 1278, GMW3097Gain: -23 to 8 dBiApplication/Test Type: RF EMC immunity testingFrequency Range: 30 MHz - 6 GHzMaximum Continuous Power: 500 WattsTypically In Stock -
Rent ETS-Lindgren 5402 GTEM Test Cell for Small DUT
SKU: 10839
Features: Ships fully assembled, easy unpack and setupApplications: Radiated Emissions, RF/Radiated Susceptibility TestingMax DUT Size: 8" x 8" x 6"Test Standards: FCC Part 15, IEC 61000-4-3$1,750.00 - $17,500.00In Stock -
3ctest RWS 600 Ring Wave Generator for IEC 61000-4-12
SKU: 10595
Display Interface: 5.7 inch TFT touch screenPhase synchronization: 0°-360°, 1° step or randomPolarity: Positive. negative, alternatingPulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30ΩPulse voltage (open circuit): 0.25 kV–6.0kV ± 10%4-6 Weeks -
PHFA Harmonics and Flicker Analyzer
SKU: 10451
Standards Met: IEC/ISO 60601-1-2, IEC 61000-3-2, IEC 61000-3-3, IEC/EN61000-4-7, IEC/EN61000-4-15EUT Power Handling: 1PH/16 AmpsMax Current (with LDPS Source): 16 Amps (5 Amps)Max Voltage (with LDPS Source): 690 Volts (630 Volts)IN STOCK -
Haefely PEFT 4010 Electrical Fast Transient EFT/Burst Generator
SKU: 10246
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Coupling: Built-in Single Phase 250 Volts AC / 110 Volts DC and 16 AmpsPulse amplitude: 0.10 - 4.5 kVApplications: Electrical Fast Transient ImmunityTest duration: Impulses per burst 1000 max Impulses per second 12000 max$550.00 - $1,495.00Typically In Stock -
SS1G9k RF Conducted Susceptibility Power Amplifier
SKU: 172501
Frequency Range: 9 kHz - 1 GHzOutput Power (P1dB): 5 Watts to 1,000 WattsHarmonics: 20 dBc typRF Connectors: N (f) - Front or RearInquire for Availability