Overview
Schloder CWG 1528 Four Unshielded Unsymmetrical Interconnection Lines
The coupling network can be used to carry out EMC tests to the standards IEC 61000-4-5 (surge). The interference pulses of the surge generator are coupled to the interconnection lines of the tested unit. The coupling paths (line to line or line to earth) can be selected by using the coupling switches. The coupling network can be operated via an RS 232 interface with a personal computer – together with the surge generator CWG 1500 / CWG 500. So the selection of the coupling paths can be automated.
| Technical Data | ||||||
| Nominal voltage AC | max. 240 V, 50/60 Hz | |||||
| Nominal voltage DC | max. 240 V | |||||
| Nominal /max. current | 4 x 6 A at 40° C ambient temperature | |||||
| Decoupling inductance | 4 x 20 mH / 6 A (Series choke) | |||||
| Coupling capacity | 0.5 µF and 40 ohm | |||||
| Max. surge pulse | 1.2/50 µs 4400 V | |||||
| High voltage surge input | Fischer high voltage jack D105A039 | |||||
| EUT feeding | laboratory-banana-jacks | |||||
| EUT connection | laboratory-banana-jacks | |||||
| Remote | serial, RS 232 | |||||
| Supply voltage input | 00-240 V / 47-63 Hz / 80 VA plug-in power filter on the back | |||||
| Additional earth connection jacks | on front and rear side | |||||
| Temperature environment | 0 - 40 °C | |||||
| Rel. humidity | 0 – 60% | |||||
| Cabinet | 19" housing, 3 RU | |||||
| Weight | app. 14 kg / 30.86 lbs | |||||
