GMW3172
-
EM Test LD 200N Load Dump Generator for ISO 16750-2
SKU: 5955
Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$1,690.00 - $2,290.00Typically In Stock -
3ctest TIS 700 Automotive Transient Simulator ISO 7637
SKU: 11772
Test voltage: 3 - 700 VoltsMax EUT DC Voltage (W/ Built In CDN): 60 VoltsMax EUT DC Current (W/ Built In CDN): 30, 60, 100, 200 AmpsSource Impedance: 2 Ω, 4 Ω, 10 Ω, 20 Ω, 30 Ω, 50 ΩCoupling Modes: ICC, CCC, DCC$750.00 - $5,675.00In Stock -
Teseq NSG 5500 Automotive Immunity Generator
SKU: 10257
Applications: Automotive Electrical Disturbances, EV EMC TestingTest Standards: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 AmpsInquire -
3ctest APS Automotive Power Supply Voltage Change Simulator
SKU: 22867
Output Voltage: Configurable from -80 to 80 Volts to as minimal as 40V/0VOutput Current Options: 10A, 30A, 50A, 100AOutput Frequency Bandwidth: up to 300 kHzFeatures: Automatic compensation function for voltage dropPre-Programmed Standards: All sections of ISO 16750-2, ISO 7637-2 Pulse 2B and 4,Most Models In Stock -
3ctest AWG 100 Arbitrary Waveform Generator for Automotive EMC
SKU: 11689
Output Channels: 2 Standard (4 Optional)Waveform Types: DC wave, ramps, sine, sweep frequency, exponential, frequency modulation/amplitudAdjustable Waveform Parameters: Amplitude, duration, frequency, DC offset, rectification, duty cycle, phase angle, trigger, noiseWaveform Voltage Amplitude: 0 to ±10.00 VWaveform Output Rat: 25 MSPS per channelIn Stock -
AE Techron DSR 100 Ripple Generator and AC/DC Voltage Source
SKU: 11769
Test Standards: ISO 7637-4, ISO 21498Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesFrequency Range: DC - 300 kHzOutput Current: up to 400 AmpsTypically In Stock -
EM Test Automotive Test System for ISO 7637-2
SKU: 10596
ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NMicropulse: Micropulse module for test pulses 1, 2A and 6Inquire for availability -
3ctest PFS-A Series Voltage Interruption Simulator
SKU: 2686
DUT supply voltage: 0 to 80 VDUT supply current: 50 AmpsPeak current: 100A duration 500 msSwitching Time: ≤ 200ns (meets GM3172 9.2.18) And compatible with ≤ 1us (LV124, VW 80000, etc.)Fall Duration: 1us – 1 sIn Stock -
Amplifier Research CI00400AM4 BCI RF Conducted Immunity Generator
SKU: sku-1076
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, MIL-STD-461 CS114, ISO 11452-4, DO-160 Section 20Applications: BCI TestingCDN Test Levels (w/ built-in amplifier): 60VrmsBCI Test Levels (w/ built-in amplifier): 400mA/114 dBµATypically In Stock -
Typically In Stock -
CISPR 25 ALSE Test Chamber Build & Install
SKU: 11326
Frequency Range: DC - 40 GHzIsolation: 100-110 dB typical (75 dB min in the Magnetic Field)1-6 Months -
RF/EMC Anechoic Test Chamber Build and Install
SKU: sku-1326
Test Standards: CISPR 25, MIL-STD-461, IEC 61000-4-3, CISPR 16 and moreChamber Sizes: 1 meter and 3 meters (10 meters coming soon)Frequency Range: 30 MHz - 100 GHzChamber Types: Anechoic, Semi-Anechoic, Reverberation, Tent/PortableFaster Than Most!