Noiseken LSS-15SC Lightning Surge Simulator

Condition:
Used
Manufacturer:
Noiseken
Online Orders Ship Same Day

 

Availability:

Inquire for Availability

SKU:
10842

 

This product is available for shipping to North America and Western European countries.


Getting Started...

Check out our Google Reviews

Overview

The Noiseken LSS-15SC is the lightning surge simulator conforming to "Surge Immunity Test Requirements" of IEC Pub. 801-5. This simulator is provided with a combination wave generator and is also provided with an AC/DC line injecting unit as a surge injecting unit.

Waveform Generator
The LSS-15SC is provided with a surge generator, namely a combination wave generator prescribed by "Surge Immunity Test Requirements" of IEC Pub. 801-5. The combination wave means a voltage waveform of 1.2/50 μ s when the circuit is open and a current waveform of 8/20 μ s when the circuit is closed.

Injecting Unit
Surge Immunity Test Requirements of IEC Pub. 801-5 prescribe several kinds of coupling/decoupling networks. The LSS-15SC is provided with an AC/DC line injecting unit.

(1) The AC/DC line injecting unit has a power capacity of AC240V 20A single phase and DC60V 20A for equipment under test. This unit is used to inject a combination wave to an AC/DC power line.

(Note) It is necessary to receive power from an external AC power supply or DC power supply.

Components of LSS-15SC
The LSS-15SC consists of Control Unit, Surge Generator and AC/DC Line Injecting Unit, which are set in the rack (1800mm in height x 555mm in width) with casters.

Note: It is necessary to receive power from an external AC power supply or DC power supply.

Components of LSS-15SC

The LSS-15SC Consists of Control Unit, Surge Generator and AC/DC Line Injecting Unit, which are set in the rack (1800 mm in height x 555 mm in width) with casters.


Appearance of LSS-15SC
  1. Control Unit
    Use to control a surge output in accordance with settings of surge output conditions. Surge output conditions can be set on the front operating panel. It incorporates a high-voltage power supply for surge generation.

  2. Surge Generatos
    Used to generate combination waves.

  3. AC/DC Line Injecting Unit
    Used to inject a combination wave to an AC or DC power line. Injection mode can be set on the right side of the AC/DC line injecting panel.

Specifications and Performance of LSS-15SC
Items Specifications Remarks
Generated Surge Waveforms

Combination wave

  • Voltage surge 1.2/50 μ s (When output terminal is open.)
    Duration of wave front ±30%
    Duration of wave tail ±20%
  • Current surge 8/20 μ s (When output terminal is short-circuited.)
    Duration of wave front ±20%
    Duration of wave tail ±20%
Generated Surge Voltage and Current

Combination waves
HI: 500 ~ 15000V (1.2 / 50 μ s)
250 ~ 7500A (8 / 20 μ s)
LOW: 500 ~ 7500V (1.2 / 50 μ s)
250 ~ 35750A (8 / 20 μ s)

(Note)
Output Impedance Combination wave 2.0 Ω ± 10%
Polarity Positive or negative (Change-over type)
AD/DC Line injection Power capacity of EUT Single Phase AC240V 20A MAX
DC 60V 20A MAX
Phase angle control of AC line 0° ~ 360 °
Accuracy: ± for phase setting
(At AC 70V or over)
Infinitely Variable 30 steps
Reapeating cycle of surge generation Minimum repearing cycle Combination wave Approx. 20 seconds
Time Setting range 20 seconds ~ 59 minutes and 59 seconds Auto mode only
Counter setting range 1~999999 (6-digit fighure, subtraction type)
Remote controller Manual mode swtich, Auto mode switch, Start switch, Stop switch, High Voltage OFF Switch
Main unit driving power supply AC220V 50-60 Hz Approx. 600VA
Dimensions (W) 555 X (H) 1800 x (H) 790 mm

Note: When surge output voltage is below 500V, the surge waveform will not come within the tolerance prescribe by the "Surge Immunity Test Requirements" of IEC Pub. 801-5.

Key Considerations

Manufacturer:
Noiseken

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.