Name: Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing
Brand: Teseq
SKU: sku-851
Price: 1245 USD
Availability: InStock

Overview

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Teseq CDN S751AS Includes:

Coupling Decoupling Network for IEC 61000-4-6, type S1, 150 kHz-230 MHz (BNC 75Ohm)
Calibration adapters (CAL U100B, SAR S500)
Storage Case
Calibration Certificate
Manual
10% off Service for Life of Unit

Key Considerations

Manufacturer:

Teseq

Weight:

1.5 kg (3.3 lbs)

Common Mode Impedance:

150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating:

1000 mA maximum

Decoupling of Common Mode Disturbance:

150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

Dimensions:

4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

Frequency Range:

150 kHz to 230 MHz

Mains & EUT Connections:

BNC 75 Ω

RF Connector:

BNC 75 Ω

RF Input Voltage:

20 Volts Max

Standards Met:

IEC 61000-4-6

Voltage Division Factor:

10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz

Voltage Rating:

AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

Related EMC Equipment & Solutions

RF Conducted Immunity Testing to IEC 61000-4-6

SKU: sku-1955

View Product

Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6

SKU: 10548

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4

Applications: Bulk Current Injection Testing, RF Conducted Immunity

CDN Test Levels (w/ built-in amplifier): 30Vrms

BCI Test Levels (w/ built-in amplifier): 200mA

Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

Videos: Calibration Example, Remote Operation Setup

$19,500.00

Typically In Stock

Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

SKU: 10828

Weight: 1.5 kg (3.3 lbs)

Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 250 mA (CDN ST08 1 Amp)

Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz

Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)

RF Connector: BNC 50 Ω

RF Input Voltage: 20 Volts Max

Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2

Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)

Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)