150 Ohm Adapter Set for IEC 61000-4-6 Calibration Jig/BCI Test

150 Ohm Adapter Set for IEC 61000-4-6 Calibration Jig/BCI Test

Online Orders Ship Same Day

 

SKU:
sku-856

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

The EMC Shop is stocking the elusive adapters required for IEC 61000-4-6 bulk current injection testing during calibration. Parts included:

  • INA 721-100: 150 Ohm to 50 Ohm Adapter (N-Type)
  • INA 721-150: 150 Ohm Terminaction (N-Type)

Related EMC Equipment & Solutions

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

SKU: sku-851

Weight: 1.5 kg (3.3 lbs)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 1000 mA maximum
Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: BNC 75 Ω
RF Connector: BNC 75 Ω
RF Input Voltage: 20 Volts Max
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz
Voltage Rating: AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
$1,245.00
EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

SKU: sku-410

Weight: 17 kg (37.5 Pounds)
Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications
Dimensions: 19"/3 HU
Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz
Impedance: 50 Ohms
Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)
Maximum Continuous Power: 80W (nominal)
Standards Met: IEC 61000-4-6
Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service
Voltage Rating: 1 V to 30 Volts Max
View Product View Product
EFT-CAL-KIT Burst Generator Calibration Kit for IEC 61000-4-4

EFT-CAL-KIT Burst Generator Calibration Kit for IEC 61000-4-4

SKU: 10518

Weight: Appprox.140g
Connectors: Input: BNC or SHV, Output: BNC
Cross talk attenuation: 54dB, 60dB
Frequency Range: -3dB bandwidth: 400MHz
Impedance: EFT-AT50 input 50 Ω @ output 50 Ω | EFT-AT1000 input 1000Ω @ output 50Ω
Pulse voltage (open circuit): 8kV
Standards Met: IEC/EN 61000-4-4, ISO7637.2-p3
Voltage Rating: EFT-AT50: 500:1 | EFT-AT1000: 1000:1
$2,950.00
IN STOCK
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form