Conducted RF Immunity Test Equipment - The EMC Shop

Conducted RF Immunity Categories

Radio Frequency Test Generators

Bulk Current Injection (BCI) Probes

Conducted RF Immunity

Schwarzbeck CDN S8 RJ45 Coupling Decoupling Network

SKU: 11220

Frequency Range: 150 kH to 230 MHz

Max RF-test voltage (emf): 30 V

RF Input Power: 6 W (continuous)

Voltage division factor RF-input – EuT-port: 10 dB 150 kHz – 80 MHz: ±1 dB 80 MHz – 230 MHz: +3 dB / -2 dB

EuT, AE connectors: RJ45

Inquire for Availability

VIEW PRODUCT Cart
Com-Power CLEM-6146 RF Injection Device for Conducted Immunity

SKU: sku-524-1

Standards: EN/IEC 61000-4-6

NOTE: Our price includes CLEMA-6146 calibration adapters (150 Ohm to 50 Ohm)

Frequency Range: 10 kHz to 1000 MHz

Max. Cable Diameter: 0.75"

Maximum Continuous Power: 10 kHz to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

Cost New:

Was:

Price Now:

$825.00

Inquire for Lead Time

ORDERING OPTIONS
Frankonia CIT-10 RF Conducted Immunity Test System

SKU: 6886

Test Capabilities: RF Conducted Immunity

CDN Test Levels (w/ built-in amplifier): 30Vrms

BCI Test Levels (w/ built-in amplifier): 200mA

Standards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4

Applications: Bulk Current Injection Testing, RF Conducted Immunity

Cost New:

Was:

Price Now:

$16,500.00

In Stock
Fischer FCC F-120-9 Bulk Current Injection Probe

SKU: 3729

Frequency Range: 10 kHz – 230 MHz

Input Power Rating: 100 Watts

Inner Diameter: 40 mm

Outer Diameter: 127 mm

BCI Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

Cost New:

Was:

Price Now:

$295.00

In Stock

ORDERING OPTIONS
EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing

SKU: sku-2132

Weight: approx. 14 kg

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Clamp factor (CF): -.6 dB at 100 kHz to -2.2 dB at 1 GHz (Min -4 dB at 700 MHz

Connector: N-type female

Dimensions: 666 mm x 135 mm x 120 mm

VIEW PRODUCT Cart
Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

SKU: sku-851

Weight: 1.5 kg (3.3 lbs)

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 1000 mA maximum

Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

Cost New:

Was:

Price Now:

$1,245.00
Rent Noiseken CA-805B Coupling Adapter for Noise Injection

SKU: 30079

Weight: Approx. 3 kgs

Dimensions: (W)350 x (H) 120x (D)130 mm

Input Voltage: 400 V Max.

Clamp Interim: 26 mm

Coupling Ratio: 1:1

Typically in Stock

VIEW PRODUCT Cart
BCIP100M 10 kHz - 100 MHz, 100 Watt EMI Current Injection Probe

SKU: 3919

Frequency range: 10 kHz - 230 MHz

Inner diameter (I.D.): 1.50" ( 38 mm )

Connector type: N(f)

Maximum input power: 200 Watts

Max current field ( @400 MHz ): 500 mA

Typically in Stock

VIEW PRODUCT Cart
Com-Power CLCI-100 Bulk Current Injection Probe for 10 KHz to 100 MHz

SKU: sku-384

Weight: 4.5 lbs. (2.04 Kg)

Aperture: 1.575” (40 mm)

Application/Test Type: Conducted and Radiated Susceptibility Testing

Dimensions: Window Diameter: 1.575” (40 mm) Outside Diameter: 5.75” (146 mm) Width: 2.75” (70 mm)

Frequency Range: 10 KHz to 100 MHz

VIEW PRODUCT Cart
Pearson 8700i Bulk Current Injection Probe for MIL-STD-461 CS114, CS115, CS116

SKU: 10532

Test Standards: MIL-461 CS114, MIL-461 CS115

Additional Test Standard: MIL-461 CS116

Hole Diameter: 2 inches

Max. Input Power: 100 W (for 1 hour)

Frequency Range: 10 kHz to 400 MHz

Inquire for Availability

VIEW PRODUCT Cart