RFCP300M RFI Current Sensing Probe 20 Hz to 300 MHz

RFCP300M RFI Current Sensing Probe 20 Hz to 300 MHz

Top Frequency Range:
300 MHz
Bottom Frequency Range:
20 Hz
AC Current Handling (DC-400Hz):
500 Amps
RF Current Handling (CW/Pulse):
2/200 Amps
Style:
Clamp On
Diameter:
2.62"
Transfer Impedance:
1 Ohm
Test Standards:
IEC 61000-4-6
Online Orders Ship Same Day

 

SKU:
sku-2056

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

The RFCP300M RFI current sensing probe is designed to permit field intensity meters, spectrum analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multiconductor cables, ground and bonding straps, shielded conduits and on coaxial cables.

For ease and convenience of performing conducted measurements, all of our current probes utilize the split type clamp-on design. Small and lightweight, each Current Probe is manufactured to exacting standards, thus insuring repeatable performance.

RFCP300M RFI Current Sensing Probe Specifications:

  • Frequency range: 20 Hz to 300 MHz
  • Transfer impedance (ZT): 1 Ohm
  • Output load impedance: 50 + j 0 Ω
  • Continuous signal current (CW): 1.5 Amps (100 Amps Peak)
  • Maximum power voltage: Limited by the conductor under test
  • Probe circuit: Inserted primary toroidal transformer
  • Connector: Type "N" female
  • Style: Clamp on
  • Weight: 5.5 pounds

Key Considerations

Top Frequency Range:
300 MHz
Bottom Frequency Range:
20 Hz
AC Current Handling (DC-400Hz):
500 Amps
RF Current Handling (CW/Pulse):
2/200 Amps
Style:
Clamp On
Diameter:
2.62"
Transfer Impedance:
1 Ohm
Test Standards:
IEC 61000-4-6

Related EMC Equipment & Solutions

AH Systems BCP-610 High Power RF Current Probe, 20 Hz - 20 MHz
Quick view

AH Systems BCP-610 High Power RF Current Probe, 20 Hz - 20 MHz

SKU: sku-256

Weight: 1.4 Lbs (650 grams)
Aperture: 1.25" (32 mm)
Application/Test Type: Measure currents on 50 Hz, 60 Hz and 400 Hz powerlines without making direct contact with the source conductor or metallic surface
Current Rating: 400 Amps (5,000 Peak) Maximum
Frequency Range: 20 Hz - 20 MHz
RF Connector: N-Type(female)
Standards Met: IEC 61000-4-16, IEC 61000-4-19 Annex C, SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E CS101, CS109 and RS101.
Transfer Impedance: -63 to -28 dBΩ
In Stock
View Product View Product
Fischer F-35A 100 Hz – 108 MHz Current Monitor Probe
Quick view

Fischer F-35A 100 Hz – 108 MHz Current Monitor Probe

SKU: 1819

Aperture: 32 mm
Connector type: Type-N
Dimensions: Internal diameter: 32 mm External diameter: 98 mm Height: 38 mm
Frequency range: 100 Hz – 100 MHz
General Data: Technical Details
High frequency 3dB cut-off: 108 MHz
Low frequency 3dB cut-off: 100 Hz
Maximum peak current: 100 Amps
Output resistance: 50 Ohms
Probes: Current monitoring
$395.00
In Stock
Ordering Options
BCIP400M Bulk Current Injection Probe - The EMC Shop
Quick view

BCIP400M - 400 MHz Bulk Current Injection Probe

SKU: sku-1910

Frequency range: 1 MHz - 400 MHz
Inner diameter (I.D.): 1.50" ( 38 mm )
Connector type: N(f)
Maximum input power: 200 Watts
Max current field ( @400 MHz ): 400 mA
Max voltage field ( @230 MHz ): 30 Vrms
Test Standards: ISO 11452-4
$3,450.00
Usually ships in 24 hours.
AH Systems BCP-614 Probe to Measure Conducted RF Currents, 10 KHz - 300 MHz
Quick view

AH Systems BCP-614 Probe to Measure Conducted RF Currents, 10 KHz - 300 MHz

SKU: sku-379

Weight: 5.5 lb.'s (2.5 Kg)
Aperture: 2.6" (66 mm)
Application/Test Type: Conducted and Radiated Susceptibility Testing
Current Rating: 350 Amps
Dimensions: 4.27" (134 mm)
Frequency Range: 10 KHz - 300 MHz
RF Connector: N-Type (female)
Standards Met: IEC 61000-4-6; IEC 60601-1-2, Mil-STD-461 CS 114
Transfer Impedance: -25 to 1 (dBohm)
$3,500.00
Typically In Stock
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form