-
ETS-Lindgren FP5083 Isotropic Electric Field Probes
SKU: sku-5268
Dynamic Range: 3 to 300 Volts/meter (V/m)Frequency Response: 80 MHz - 26 GHz (± 1.5 dB), 26 GHz - 40.0 GHz (± 3.0 dB)Ranges: 10, 30, 100, 300 V/m full scaleAverage Overload: 6 times full scale (each range)Battery Life: 17 Hrs continuous (full charge)$995.00Typically In Stock -
Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing
SKU: sku-1903
Application/Test Type: Radiated Immunity, Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF roomsField Strength Range: 0.1 V/m to 1,000 V/m (7 to 10 kV/m under 30 MHz)Frequency Range: 10 Hz to 8.2 GHzResolution: <0.01 V/mTest Standards: IEC 61000-4-3IN STOCK -
-
Rent Narda NBM-520 Broadband E-Field Meter Kit, 100 kHz - 50 GHz
SKU: sku-886
Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAhFrequency Range: 100 kHz - 50 GHzOperation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)Recharging Time: 2 hours -
Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz
SKU: sku-885
Weight: 10.6 oz.Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAhDimensions: 1.5 x 2.0 x 8 inchesFrequency Range: 100 kHz - 60 GHzOperation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)Recharging Time: 2 hoursStandards Met: IEC/EN 61000-4-3$595.00Typically In Stock -
-
-
PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz
SKU: sku-611
Weight: 450 gApplication/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: 2 ea. AA type, re-chargeable batteriesDimensions: 96x64x465 mmFrequency Range: varies on probeOperation Time: 8 hours (typical)Probe Holder Tip: BNCRecharging Time: re-charged via supplied chargerRF Field Probes: E-FieldStandards Met: IEC/EN 61000-4-3 -
Wavecontrol SMP3 RF Field Meter
SKU: SMP3
Frequency Range: DC to 60 GHzBattery Life: >24 HoursReadout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)Measurement Range: 0.2 - 1000 V/mHigh Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 HzProbe Selection: E & H Field (DC - 60 GHz)More Features: Long and Short Term Recoding Options, Peak and RMS, Many more.Ships within 24 hours. -
Amplifier Research FL8040 CW and Pulse E-Field Probe Kit
SKU: sku-2128
Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Communication: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic SerialField Strength Range: 0.5–800 V/m (0.01 V/m)Frequency Range: 20 MHz – 40 GHzOperation Time: Laser Powered - SeemlessStandards Met: MIL-STD-461 RS103, DO-160, FORD FMC 1278, SAE J1113/27, GMW 3091/3097/3103Typically In Stock -
Narda NBM-520 Broadband Field Meter, 100 kHz - 60 GHz
SKU: sku-613
Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probesBattery Life: 20 hoursRecharging Time: 2 hoursCalibration Status: NIST (5/22/2023)PC Interface: Fiber Optic via USB (6 ft cable)Software: NBM-TS, Tile, EMCWare, EMC32Videos: Software Setup$450.00In Stock -
Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter
Frequency Range: 0 Hz (DC) to 90 GHzDisplay type: Sunlight readable 5” color TFT-LCD anti-glare display (HD 1280 x 720 pixels)Brightness: Manual control or automatic control via brightness sensorFast data transmission: Optical interface, Ethernet, USB-COperating languages: Largely language-independent measurement control via symbols. Menu languages: English, German, more are planned.
