Isotropic Field Probes & Sensors Test Equipment, Systems & Solutions
-
Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing
SKU: 7384
Application/Test Type: Radiated Immunity, Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF roomsField Strength Range: 0.1 V/m to 1,000 V/m (7 to 10 kV/m under 30 MHz)Frequency Range: 10 Hz to 8.2 GHzResolution: <0.01 V/mTest Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20Typically In Stock -
ETS-Lindgren FP5083 Isotropic Electric Field Probes
SKU: 5972
Dynamic Range: 3 to 300 Volts/meter (V/m)Frequency Response: 80 MHz - 26 GHz (± 1.5 dB), 26 GHz - 40.0 GHz (± 3.0 dB)Ranges: 10, 30, 100, 300 V/m full scaleAverage Overload: 6 times full scale (each range)Battery Life: 17 Hrs continuous (full charge)$995.00Typically In Stock -
EFP60G Broadband EMF Probe
SKU: 5304
Frequency Range: 2 MHz - 60 GHzField Strength Range: 4 - 1000 V/m, 4 – 270 mW/cm2Linearity: +/- 1.5 dBApplications: RF Interference Analysis and EMF SniffingRotational Isotropicity: +/- 3 dBConnector Type: SMA(f)Typically In Stock -
Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz
SKU: AR-FL8018
Frequency Range: 20 MHz - 18 GHzMeasurement Type: CW, AM & PulseField Strength Range: 2 – 1000 V/mDynamic Range: >54 dBIsotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHzApplications: Automotive EMC, Commercial EMC, Aviation EMC, Military EMC, Wireless R&DStandards Met: MIL-STD 461 RS103, DO-160Additional Standards Met: IEC 61000-4-3Inquire for Availability -
Amplifier Research FP2083 Isotropic RF Electric Field Probe
SKU: 5971
Frequency Range: 80 MHz to 40 GHzField Strength Range: 300 V/mApplications: Monitoring Electric Field Strengths, Radiated ImmunityStandards Met: IEC/EN 61000-4-3Was:$495.00$395.00In Stock -
Narda PMM EP-603 300 kHz - 18 GHz Isotropic E-Field Probe
SKU: PMM EP-603
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.17 - 170 V/m (0.01 V/m)Frequency Range: 300 kHz to 18 GHzStandards Met: IEC/EN 61000-4-3Interfaces: Fiber-OpticBattery Life: 60-80 hours -
Amplifier Research FP5000 Isotropic E-Field Probe, 10 kHz - 1 GHz
SKU: 4902
Frequency Range: 10 kHz - 1 GHzResponse Time: 40 msec. minimumIsotropicity: +/-0.5 dB on three orthogonal axesSensitivity: 1-300 V/MSampling Rate: 1-26 samples/second$3,950.00In Stock -
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz
SKU: 57543
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.5 to 800 V/m (0.01 V/m)Frequency Range: 100 kHz to 6 GHzStandards Met: IEC/EN 61000-4-3Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic SerialBattery Life: 60-80 hoursTypically In Stock -
Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe
SKU: 5497
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 1.5 to 1500 V/m (0.01 V/m)Frequency Range: 5 kHz to 9.25 GHzStandard Met: IEC/EN 61000-4-3Interface: Fiber-OpticBattery Life: 60-80 hoursDynamic Range: 1,5 to 1500 V/m, 60 dB single rangeTypically In Stock -
Aaronia ISOLOG 3D Isotropic Antenna 9kHz - 6 GHz
SKU: ISOLOG 3D
Frequency Range: 9kHz - 6 GHzNominal Impedance: 50 ΩGain: Up to 10 dBi (typical)RF-Connector: N FemaleInternal Preamps: Two (+15dB each (@2GHz))Inquire for Availability -
EFP40G Isotropic Electric Field Probe 1 MHz - 40 GHz
SKU: EFP40G
Weight: 0.5 lb, 230gDimensions: (LxD): 12.0"x2.25" (310x58 mm)Frequency range: 1 MHz - 40 GHzApplications: RF Interference Analysis and EMF SniffingConnector Type: SMA(f)Inquire for Availability -
Schwarzbeck FSH3D Isotropic 3-Axial RX Loop Antenna
SKU: FSH3D
Frequency Range: 9 kHz - 200 MHz (nominal)Connector: N-female 50 ΩPower Supply: 5 V DC < 100 mAPower Supply and Logical Connector: Binder 99-0421-10-07 Serie 712VSWR: typ. < 1.5 (20 kHz - 50 MHz)Inquire for Availability