Teseq CDN S Series Coupling Network for Screened or Coaxial Cables

Teseq CDN S Series Coupling Network for Screened or Coaxial Cables

Application/Test Type:
Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables
Common Mode Impedance:
150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating:
250 mA (CDN ST08 1 Amp)
Decoupling of Common Mode Disturbance:
150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Frequency Range:
10 kHz to 80 MHz or 150 kHz to 230 MHz
Mains & EUT Connections:
BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)
RF Connector:
BNC 50 Ω
RF Input Voltage:
20 Volts Max
Standards Met:
IEC 61000-4-6, CISPR 22, IEC 60601-1-2
Voltage Division Factor:
9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)
Voltage Rating:
AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
Manufacturer:
Teseq
Online Orders Ship Same Day
$710.00

 

SKU:
4255
Getting Started...

Overview

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards.

Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Teseq CDN S Series Features:

  • Coupling networks designed for IEC/EN 61000-4-6, CISPR 22, IES 60601-1-2 and more.
  • S-type CDN for screened data and telecom lines, ethernet, and HDMI (see USB CDN's)
  • 50 Ohm/75 Ohm Coaxial Cables
  • High speed HDMI with HDCP, HEC (Ethernet), ARC and DSC
  • XLR-Audio, pin 3 to ground

Teseq CDN S Series Configurations:

*USB CDN's categorized seperately.

  • CDN HDMI, 150 kHz - 230 MHz: S19 CDN for HDMI, connector type HDMI (USB type A)
  • CDN S150: CDN S15, 150 kHz - 230 MHz (D-sub 15 Pin)
  • CDN S200: CDN S2, 150 kHz - 230 MHz (XLR-Audio, pin 3 to ground)
  • CDN S250: CDN S25, 150 kHz - 230 MHz (D-sub 25 Pin)
  • CDN S250-10: CDN S25, 10 kHz to 80 MHz (D-sub 25 Pin)
  • CDN S400: CDN S4, 150 kHz - 230 MHz (DIN 5 Pin)
  • CDN S501: CDN S1, 150 kHz - 230 MHz (BNC 50 Ohm)
  • CDN S501-10: CDN S1, 10 kHz to 80 MHz (BNC 50 Ω)
  • CDN S502: CDN S1, 150 kHz - 230 MHz (N-Type 50 Ohm)
  • CDN S751: CDN S1, 150 kHz - 230 MHz (BNC 75 Ohm)
  • CDN S752: CDN S1, 150 kHz - 230 MHz (N-Type 75 Ohm)
  • CDN S900: CDN S9, 150 kHz - 230 MHz (D-sub 9 Pin)
  • CDN S900-10: CDN S9, 10 kHz - 80 MHz (D-sub 9 Pin)
  • CDN ST08A: CDN for telecom screened eight lines with RJ45 connector (construction identical with ISN ST08)
  • CDN ST08-10, 10 kHz - 80 MHz (RJ45): CDN for telecom screened, up to eight lines with RJ45 connector (construction identical with ISN ST08)

Key Considerations

Manufacturer:
Teseq
Application/Test Type:
Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables
Common Mode Impedance:
150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating:
250 mA (CDN ST08 1 Amp)
Decoupling of Common Mode Disturbance:
150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Frequency Range:
10 kHz to 80 MHz or 150 kHz to 230 MHz
Mains & EUT Connections:
BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)
RF Connector:
BNC 50 Ω
RF Input Voltage:
20 Volts Max
Standards Met:
IEC 61000-4-6, CISPR 22, IEC 60601-1-2
Voltage Division Factor:
9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)
Voltage Rating:
AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

Related EMC Equipment & Solutions

Teseq CDN ST08 Coupling Decoupling Network - The EMC Shop

Teseq CDN ST08 Coupling Decoupling Network

SKU: 8413

Frequency Range: 10 kHz to 80 MHz
Application: CDN for screened eight lines with RJ45 connector
Current Rating: 1000 mA
EUT Connector: BNC 50 Ω
Common mode impedance (EUT Port) 10 kHz to 26 MHz: 150 Ω ±20 Ω
Common mode impedance (EUT Port) 26 MHz to 80 MHz: 150 Ω +60 Ω /-45 Ω
RF Voltage: <20 V
$1,600.00
Typically in Stock
Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

SKU: sku-224

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product Cart
Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

SKU: sku-230

Weight: 1.5 kg (3.3 lbs)
Application/Test Type: Coupling / decoupling network (CDN) used for all unscreened, unbalanced lines, carrying low current
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 2300 MHz: 150 Ω +60 Ω / -45 Ω; 230 MHz to 300 MHz 1): 150 Ω +60 Ω / -60 Ω
Current Rating: 200 mA to 4 Amps (refer to data sheet for exact model specifications)
Decoupling of Common Mode Disturbance: 10 kHz: Over 10 dB:150 kHz: Over 35 dB: 26 MHz: Over 45 dB: 80 MHz: Over 25 dB;150 kHz: Over 30 dB: 1.5 MHz: Over 60 dB: 30 MHz: Over 50 dB: 230 MHz: Under 30 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz
Mains & EUT Connections: 4 mm banana or D-Sub 25 pins
RF Connector: BNC 50 Ω
RF Input Voltage: 30 Volts Max
Standards Met: IEC 61000-4-6, CISPR 15
Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB, 10 dB ±1 dB for CDN A501, A701, A801; 80 MHz to 300 MHz 1): 9.5 dB +3 dB / -2 dB 10 dB +3 dB / -2 dB for CDN A501, A701, A801; All other models 10 dB ±1 dB
Voltage Rating: AC max. voltage (line to ground): 63V - 160V; DC max. voltage (line to ground): 100V - 250V; Test voltage: 250 V - 400 V DC, 2 sec (refer to data sheet for exact model specifications)
View Product View Product
Teseq CDN T Series Coupling Network for Unscreened Communication/Data Lines

Teseq CDN T Series Coupling Network for Unscreened Communication/Data Lines

SKU: sku-228

Weight: 0.5 kg (1.1 LB.'s)
Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD
Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω; 80 MHz to (230) 300 MHz: 150 Ω +60 Ω / -60 Ω
Current Rating: 400 mA (line), 800 mA (pair)
Decoupling of Common Mode Disturbance: 10 kHz: Over 20 dB; 1.5 MHz / 30 MHz: Over 55 dB; 80 MHz: Over 45 dB; 230 MHz: Over 35 dB;
Dimensions: 4.1 x 2.5 x 4.3 inches (10.5 cm x 6.5 cm x 11.0 cm)
Frequency Range: 150 kHz to 80 MHz (Optional 10 kHz - 230/300 MHz)
Mains & EUT Connections: D-Sub adapter to RJ45 / RJ11 (1 mm banana on certain 10 kHz models)
RF Connector: BNC, 50 Ω
RF Input Voltage: 20 Volts Max
Standards Met: IEC 61000-4-6
Voltage Division Factor: 9.5 dB ±1 dB (10 kHz to 230 MHz: 10 dB ±1 dB)
Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s
View Product View Product
Teseq CDN M416 4-Line Coupling/Decoupling Network

Teseq CDN M416 4-Line Coupling/Decoupling Network

SKU: sku-225

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Teseq CDN M432 32 Amp Coupling/Dcoupling Network

Teseq CDN M432 32 Amp Coupling/Dcoupling Network

SKU: sku-226

Weight: 6.5 kg (14.3 LB.'s)
Application/Test Type: 4 mains AC power lines emissions testing up to 32 Amps (2L+N+PE), (3L+PE), optional (3L+N)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 32 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB +3 dB / -1 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Com-Power CDN-C75E Coupling Decoupling Network for Screened Cables

Com-Power CDN-C75E Coupling Decoupling Network for Screened Cables

SKU: sku-96

Weight: 5 lbs. 2.3 kg
Application/Test Type: 75 Ohm Coaxial Cables
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 1 Amp (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 1 Amp (Max) AE and EUT Connections 50 Ohm Female BNC
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 310 V AC / 440 V DC (Line to Ground)
View Product Cart
Com-Power CDN-C50E Coupling Decoupling Network for Screened Cables

Com-Power CDN-C50E Coupling Decoupling Network for Screened Cables

SKU: sku-95

Weight: 5 lbs. 2.3 kg
Application/Test Type: 50 Ohm Coaxial Cables
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Current Rating: 1 Amp (Max)
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: 1 Amp (Max) AE and EUT Connections 50 Ohm Female BNC
RF Connector: 50 Ω BNC (Female)
RF Input Voltage: 40 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Division Factor: 9.5 dB +4 / -1
Voltage Rating: 310 V AC / 440 V DC (Line to Ground)
View Product Cart
Teseq CDN 117 2-Wire Data Line Coupling Network

Teseq CDN 117 2-Wire Data Line Coupling Network

SKU: sku-108

Weight: 2.1 kg (4.6 lbs)
Application/Test Type: 1.2 / 50 μs pulse up to 6.6 kV
Coupling: INA 170: spark gap device, 90 V trip voltage; INA 174A: capacitor 0.5 μF
Current Rating: 1.5 Amps
Decoupling chokes 1 kHz: 20 mH nominal
Dimensions: 300 mm x 55 mm x 80 mm
Ohmic resistance per path: Less than 2.5 Ω
RF Connector: 4 mm safety banana; Fischer 103
Series resistor: 2 x 40 Ω, 6 W
Transmission 3 dB BW: 800 Hz
Voltage Rating: 250 Volts AC/DC
$3,080.00
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form