Teseq CDN 117 2-Wire Data Line Coupling Network

Teseq CDN 117 2-Wire Data Line Coupling Network

Weight:
2.1 kg (4.6 lbs)
Application/Test Type:
1.2 / 50 μs pulse up to 6.6 kV
Coupling:
INA 170: spark gap device, 90 V trip voltage; INA 174A: capacitor 0.5 μF
Current Rating:
1.5 Amps
Decoupling chokes 1 kHz:
20 mH nominal
Dimensions:
300 mm x 55 mm x 80 mm
Ohmic resistance per path:
Less than 2.5 Ω
RF Connector:
4 mm safety banana; Fischer 103
Series resistor:
2 x 40 Ω, 6 W
Transmission 3 dB BW:
800 Hz
Voltage Rating:
250 Volts AC/DC
Manufacturer:
Teseq
Online Orders Ship Same Day
$3,080.00

 

SKU:
sku-108
Getting Started...

Overview

Teseq’s CDN 117 coupling-decoupling network enables convenient testing with surge pulses of 1.2/50 μs on data, signal or peripheral lines, as specified in many product standards. The test method, severity levels, permissible reaction of the EUT and specification of the coupling networks are included in IEC/EN 61000-4-5.

Teseq CDN 117 Features:

  • Telecom line surge testing
  • Max. Operating Voltage: 250 Volts
  • Max Operating Current: 1.5 Amps
  • Complies with IEC/EN 61000-4-5

Teseq CDN 117 Includes:

  • The decoupling network itself
  • Interface cables to the surge generator
  • A coupling device with a 0.5 μF capacitor
  • A coupling device with a spark gap device

4444

Key Considerations

Manufacturer:
Teseq
Weight:
2.1 kg (4.6 lbs)
Application/Test Type:
1.2 / 50 μs pulse up to 6.6 kV
Coupling:
INA 170: spark gap device, 90 V trip voltage; INA 174A: capacitor 0.5 μF
Current Rating:
1.5 Amps
Decoupling chokes 1 kHz:
20 mH nominal
Dimensions:
300 mm x 55 mm x 80 mm
Ohmic resistance per path:
Less than 2.5 Ω
RF Connector:
4 mm safety banana; Fischer 103
Series resistor:
2 x 40 Ω, 6 W
Transmission 3 dB BW:
800 Hz
Voltage Rating:
250 Volts AC/DC

Related EMC Equipment & Solutions

Teseq CDN T Series Coupling Network for Unscreened Communication/Data Lines

Teseq CDN T Series Coupling Network for Unscreened Communication/Data Lines

SKU: sku-228

Weight: 0.5 kg (1.1 LB.'s)
Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD
Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω; 80 MHz to (230) 300 MHz: 150 Ω +60 Ω / -60 Ω
Current Rating: 400 mA (line), 800 mA (pair)
Decoupling of Common Mode Disturbance: 10 kHz: Over 20 dB; 1.5 MHz / 30 MHz: Over 55 dB; 80 MHz: Over 45 dB; 230 MHz: Over 35 dB;
Dimensions: 4.1 x 2.5 x 4.3 inches (10.5 cm x 6.5 cm x 11.0 cm)
Frequency Range: 150 kHz to 80 MHz (Optional 10 kHz - 230/300 MHz)
Mains & EUT Connections: D-Sub adapter to RJ45 / RJ11 (1 mm banana on certain 10 kHz models)
RF Connector: BNC, 50 Ω
RF Input Voltage: 20 Volts Max
Standards Met: IEC 61000-4-6
Voltage Division Factor: 9.5 dB ±1 dB (10 kHz to 230 MHz: 10 dB ±1 dB)
Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s
View Product View Product
Teseq CDN M416 4-Line Coupling/Decoupling Network

Teseq CDN M416 4-Line Coupling/Decoupling Network

SKU: sku-225

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Teseq CDN ST08 Coupling Decoupling Network - The EMC Shop

Teseq CDN ST08 Coupling Decoupling Network

SKU: 8413

Frequency Range: 10 kHz to 80 MHz
Application: CDN for screened eight lines with RJ45 connector
Current Rating: 1000 mA
EUT Connector: BNC 50 Ω
Common mode impedance (EUT Port) 10 kHz to 26 MHz: 150 Ω ±20 Ω
Common mode impedance (EUT Port) 26 MHz to 80 MHz: 150 Ω +60 Ω /-45 Ω
RF Voltage: <20 V
$1,600.00
Typically in Stock
Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

SKU: sku-224

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product Cart
Teseq CDN HSS-2 Coupling Decoupling Network for High Speed Communication Lines

Teseq CDN HSS-2 Coupling Decoupling Network for High Speed Communication Lines

SKU: sku-114

Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)
Current Rating: 1 A (rated for Power over Ethernet)
Insertion Loss: 9 dB at 100 MHz
Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)
Standards Met: IEC 61000-4-5 Ed. 3
Voltage Rating: 100 VDC between pairs
$995.00
RENTAL ONLY
Ordering Options
Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

SKU: sku-230

Weight: 1.5 kg (3.3 lbs)
Application/Test Type: Coupling / decoupling network (CDN) used for all unscreened, unbalanced lines, carrying low current
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 2300 MHz: 150 Ω +60 Ω / -45 Ω; 230 MHz to 300 MHz 1): 150 Ω +60 Ω / -60 Ω
Current Rating: 200 mA to 4 Amps (refer to data sheet for exact model specifications)
Decoupling of Common Mode Disturbance: 10 kHz: Over 10 dB:150 kHz: Over 35 dB: 26 MHz: Over 45 dB: 80 MHz: Over 25 dB;150 kHz: Over 30 dB: 1.5 MHz: Over 60 dB: 30 MHz: Over 50 dB: 230 MHz: Under 30 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz
Mains & EUT Connections: 4 mm banana or D-Sub 25 pins
RF Connector: BNC 50 Ω
RF Input Voltage: 30 Volts Max
Standards Met: IEC 61000-4-6, CISPR 15
Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB, 10 dB ±1 dB for CDN A501, A701, A801; 80 MHz to 300 MHz 1): 9.5 dB +3 dB / -2 dB 10 dB +3 dB / -2 dB for CDN A501, A701, A801; All other models 10 dB ±1 dB
Voltage Rating: AC max. voltage (line to ground): 63V - 160V; DC max. voltage (line to ground): 100V - 250V; Test voltage: 250 V - 400 V DC, 2 sec (refer to data sheet for exact model specifications)
View Product View Product
Teseq CDN M432 32 Amp Coupling/Dcoupling Network

Teseq CDN M432 32 Amp Coupling/Dcoupling Network

SKU: sku-226

Weight: 6.5 kg (14.3 LB.'s)
Application/Test Type: 4 mains AC power lines emissions testing up to 32 Amps (2L+N+PE), (3L+PE), optional (3L+N)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 32 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB +3 dB / -1 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network

Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network

SKU: sku-2093

Weight: 6.5 kg
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 32 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB +3 dB / -1 dB
View Product View Product
3ctest CDN 405AF8 Surge Coupling/Decoupling Network for Data Lines

3ctest CDN 405AF8 Surge Coupling/Decoupling Network for Data Lines

SKU: sku-339

Application/Test Type: Test low-speed communication lines against lightening surge as per figure 12 in IEC/EN61000-4-5 edition 3
Coupling: 4 pair unshielded assymetric lines
Current Rating: Max 1 A
Impedance: 200Ω ±5%
Inductors: 20 mH Decoupling
Input: 1.2/50us, 10/700us
Mains & EUT Connections: RJ45 female
Standards Met: IEC 61000-4-5 Ed. 3
Test Voltage: 6kV (10kV, customized)
Voltage Rating: 90 VDC
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form