Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6

Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6

Weight:
approx. 5.5 kg
Dimensions:
670 mm x 100 mm x 79 mm
Frequency Range:
150 kHz to 1000 MHz
Max. Cable Diameter:
20 mm
Standards Met:
IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
Manufacturer:
Teseq
Online Orders Ship Same Day

 

SKU:
sku-122

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

Teseq KEMA 801A Description

The Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6 is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method. It shall be inserted on all the cables between EUT and AE except the cable under test. The KEMA 801A prevents, that the test signal applied to the EUT affects other devices, equipment or systems, which are not under test and improves the reproducibility of the test results. The clamp mechanism of the KEMA 801A makes possible a simple insertion in the test setup. Other application: Prevention of unwanted RF- currents at cables during emission measurements.

Ordering Options:

  • KEMA 801-TC -Traceable calibration (ISO17025)

Key Considerations

Manufacturer:
Teseq
Weight:
approx. 5.5 kg
Dimensions:
670 mm x 100 mm x 79 mm
Frequency Range:
150 kHz to 1000 MHz
Max. Cable Diameter:
20 mm
Standards Met:
IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

Related EMC Equipment & Solutions

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6
Quick view

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

SKU: sku-119

Weight: approx. 7 kg
Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)
Connector: N-type female
Dimensions: 647 mm x 130 mm x 105 mm
Frequency Range: 10 kHz to 1000 MHz
Impedance: 50 Ohms
Max. Cable Diameter: 20 mm
Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min
Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
View Product Cart
Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6
Quick view

Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

SKU: 10828

Weight: 1.5 kg (3.3 lbs)
Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 250 mA (CDN ST08 1 Amp)
Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz
Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)
RF Connector: BNC 50 Ω
RF Input Voltage: 20 Volts Max
Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2
Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)
Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
$1,190.00
Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing
Quick view

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

SKU: sku-851

Weight: 1.5 kg (3.3 lbs)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 1000 mA maximum
Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 150 kHz to 230 MHz
Mains & EUT Connections: BNC 75 Ω
RF Connector: BNC 75 Ω
RF Input Voltage: 20 Volts Max
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz
Voltage Rating: AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
$1,245.00
Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6
Quick view

Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6

SKU: 10548

Test Capabilities: RF Conducted Immunity
Standards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4
CDN Test Levels (w/ built-in amplifier): 30Vrms
BCI Test Levels (w/ built-in amplifier): 200mA
Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz
$19,500.00
Typically In Stock

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form