Schwarzbeck CDN S19 HDMI Coupling Decoupling Network

Condition:
New
Frequency Range:
150 kHz - 230 MHz
Max. RF Test Voltage:
30 V
Max. RF Input Power:
6 W (continuous)
RF Input Connector:
50 Ω BNC female
EuT, AE Connectors:
HDMI female
Manufacturer:
Schwarzbeck
Online Orders Ship Same Day

 

Availability:

In Stock

SKU:
8418

 

This product is available for shipping to North America and Western European countries.


Getting Started...

Check out our Google Reviews

Overview

The Schwarzbeck CDN HDMI is part of the coupling decoupling network series for conducted common mode immunity testing according to IEC 61000-4-6. The CDN HDMI is compliant to IEC 61000-4-6 figure D.1 and is suitable for immunity testing on HDMI lines.

The CDN HDMI is intended for measurements on devices with a shielded 19- pin HDMI interface, such as those used for PC monitors and televisions. The frequency range is from 150 kHz to 230 MHz. The circuitry is shown in Fig. 4.

All CDNs comply to the requirements of IEC 61000-4-6. Each CDN comes with individually measured data and a calibration certificate for the common mode impedance and the voltage division factor. Further typical data for the phase (not normative) can be found in fig. 2.

A variety of calibration adapters and other accessories are available as option. With the two included adapters SA HDMI in conjunction with the optional series resistor SR100-6W, the required spacing of 30 mm is obtained as depicted in Fig. 9 of IEC 61000-4-6.

The connection to ground can be accomplished using the ground plane of the CDN. Additionally there is a M4 thread located at the AE side to ground as well as a 4 mm socket to connect the device to ground.

Fig. 1: typ. EuT Common Mode Impedance - Schwarzbeck CDN HDMI Coupling Decoupling Network

Fig. 1: typ. EuT common mode impedance

Fig. 2: typ. Phase EuT-port, (common mode) - Schwarzbeck CDN HDMI Coupling Decoupling Network

Fig. 2: typ. Phase EuT-port, (common mode)

Fig. 3: typ. voltage division factor RF-port to EuT-port  - Schwarzbeck CDN HDMI Coupling Decoupling Network

Fig. 3: typ. voltage division factor RF-port to EuT-port

Fig. 4: principal circuitry CDN HDMI  - Schwarzbeck CDN HDMI Coupling Decoupling Network

Fig. 4: principal circuitry CDN HDMI

Schwarzbeck CDN HDMI Specifications
Frequency range 150 kHz … 230 MHz
Common mode impedance 150 kHz–24 MHz: 150 Ω ±20 Ω
24 MHz–80 MHz: 150 Ω +60 ? / -45 Ω
80 MHz-230 MHz: 150 Ω ±60 Ω
Max. RF-test voltage (emf) 30 V
Max. RF-input-power 6 W (continuous)
RF-input-connector 50 Ω BNC (female)
Voltage division factor RF-input – EuT-port 10 dB
150 kHz – 80 MHz: ±1 dB
80 MHz – 230 MHz: +3 dB / -2 dB
Housing Material Aluminium
Housing dimensions 266 x 105 x 108 mm
Weight ca. 1985 g
EuT, AE Connectors HDMI female
Included accessories SA HDMI
Ground Adapter (one unit included by default)
Optional accessories: 50 ? to 150 ? adapter SR100-6W

 

Key Considerations

Manufacturer:
Schwarzbeck
Frequency Range:
150 kHz - 230 MHz
Max. RF Test Voltage:
30 V
Max. RF Input Power:
6 W (continuous)
RF Input Connector:
50 Ω BNC female
EuT, AE Connectors:
HDMI female

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.