The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.International (IEC/EN) Categories
International (IEC/EN) Test Equipment
-
Dressler S1 Coupling/Decoupling Networks (CDN) 150 kHz-230 MHz
SKU: sku-399
Weight: 1.9 Lbs (0.86 kg)Application/Test Type: For coupling and decoupling of interference signals on screened linesCurrent Rating: 1.5 AmpsDimensions: 7.25 x 4.25 x 5.75 (inches)Frequency Range: 150 kHz to 230 MHz -
Dressler AF4 Coupling/Decoupling Networks (CDN) 150 kHz-230 MHz
SKU: sku-398
Weight: 3.3 Lbs (1.5 kg)Current Rating: 2 AmpsFrequency Range: 150 kHz to 230 MHzRF Connector: BNCStandards Met: IEC/EN 61000-4-6 -
Radiated Immunity Test System for IEC 61000-4-20 TEM Waveguides
SKU: 10393
Application/Test Type: Radiated Susceptibility TestingFrequency Range: 30 to 1000 MHzMax Radiated Field Strength: Lowest field strength: 1 V/m at 600 mm septum height* Highest field strength: approx. 18 V/m at 600 mm septum height*Maximum Continuous Power: Lowest forward power: 15 dBm* Highest forward power: 41 dBm*Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20 -
3ctest CWS 600 6kV Surge Simulator for IEC 61000-4-5
SKU: 11331
New Systems: Inquire to purchase a new unitStandards Met: UL 1449, IEC/EN 61000-4-5, IEC/ISO 60601-1-2Coupling: Single Phase Built in, 16A, 250VAC, 120VDCApplications: EMC Surge, CE MarkingMains & EUT Connections: 4mm banana plug$1,490.00 - $18,950.00In stock -
Thermo-Keytek MZ15/EC Minizap ESD Simulator
SKU: 10322
Voltage Range (Contact Mode): ±0.5 to 8 kV±0.5 to 15 kV (Air Discharge): ±0.5 to 15 kVEMC Standards: IEC 61000-4-2R/C Network: 150 pF/330 ohm standardDischarge Frequency Range: Single shot as well as 1/sec and 20/sec repetitive operation$495.00 - $6,250.00In Stock -
Haefely ECOMPACT4 Precompliant EMC Impulse Generator
SKU: sku-320
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC/EN 61000-4-4Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITTest Setup Support: Conducted Immunity/Susceptibility Test SetupMax EUT Current (w/ Built in CDN): 16 AmpsTypically In Stock -
Teseq NSG 435 ESD Gun
SKU: 11449
Test Standards: IEC 61000-4-2Applications: Medical, Commercial Electronics, IT, and moreTest Capabilities: Air/Contact up to 15kVPre-programmed Test Limits: YesMore Resources: Test Setup, ESD Waveform, RMA Form$590.00 - $8,495.00In Stock -
Amplifier Research (AR) ATR80M6G Wide Band, High Gain Log Periodic Antenna
SKU: 2657
Max RF Input Power: 5,000 WattsAntenna Factor (1 Meter): 14 to 67 db/m (±1.5 dB)Application/Test Type: Radiated Immunity TestingDimensions: 132.1 x 20.32 x 97.8 cm (52 x 8.0 x 38.5 in)Frequency Range: 80 MHz - 6 GHz$1,275.00 - $14,950.00Typically In Stock -
Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe
SKU: 5497
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 1.5 to 1500 V/m (0.01 V/m)Frequency Range: 5 kHz to 9.25 GHzStandard Met: IEC/EN 61000-4-3Interface: Fiber-OpticTypically In Stock -
Teseq CDN M5 5-Line Coupling Network for AC Power Lines, 16-32 Amps
SKU: sku-227
Weight: 6.5 kg (14.3 LB.'s)Application/Test Type: 5 mains AC power lines emissions testing up to 32 Amps (3L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 32 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dB -
Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines
SKU: sku-222
Weight: 3.3 Lbs (1.5 kg)Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: Current max. (no saturation): 300 mA; Current max. (1 s for PE line test): 25 ADimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)$790.00 -
AH Systems CPF-630 Current Monitoring Probe Calibration Fixture
SKU: 10205
Weight: 9 Lb.'sApplication/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibratedDimensions: 10" x 7" x 6"Frequency Range: 20 Hz - 500 MHz