International (IEC/EN)

(Showing 7 of 247)

Rent IEC 61000 Test EquipmentThe EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.

Application Support, Pricing, Lead Time & More: Contact Form        

Show 12 24 36 48 96

International (IEC/EN) Categories

International (IEC/EN) Test Equipment, Systems & Solutions

  • Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing

    SKU: 345

    Weight: Generator : Approx. 4.8kg Discharge gun : Approx. 800g ( excluding cable and connector)
    Standards Met: IEC 61000-4-2, ISO 10605
    Air Discharge Voltage Range: 0.20kV30.0kV±5%(30.5kVmax)
    Battery: AC100V to AC240V ±10% 50Hz/60Hz 62VA
    Contact Discharge Voltage Range: 0.20kV30.0kV±5%(30.5kVmax)
    Polarity: positive/negative
    Pre-Programmed IEC Levels: Yes
    Resolution: Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step
    Typically In Stock
  • Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

    SKU: 22006

    Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, Household
    Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
    Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)
    Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periods
    Coupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)
    Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)
    Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kV
    Standards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2
    Inquire for Availability
  • EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2

    SKU: 10645

    Voltage Range: 500V - 16,500V +/-5%
    Electrostatic Discharge: Pulse conforms to IEC 61000-4-2 edition 2
    Holding Time: More than 5 seconds
    Resolution: 100V steps
    Rise Time: 0.8ns +/- 25%
    Supply Voltage: More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAh
    Trigger: Automatic + Manual
  • 3ctest CWS 600T 10/700us Telecom Wave Surge Simulator for IEC 61000-4-5

    SKU: sku-330

    Weight: Approx 15 kg (33 lbs)
    Counter: 1-999
    Dimensions: 19 inch/6u
    Frequency Range: 50/60Hz±5%
    Front Time: Voltage: 10us±20%, time to half value: 700us±20%;
    Mains & EUT Connections: 4mm banana plug
    Output Current: Front time: 5us±20%, time to half value: 320us±20%
    Polarity: Positive, Negative or Alternate
    Pulse Duration: 11s-99s (shortest depends on test voltage)
    RF Connector: BNC, 5VTTL
    Standards Met: IEC 61000-4-5 and ITUETSI
    Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations
    Test Voltage: 0.2kV–6.0kV,±10%
    Transfer Impedance: 15ohm, 40ohm (automatic switch)
    Voltage Rating: AC 110V/220V , ±10%,