The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.International (IEC/EN) Categories
International (IEC/EN) Test Equipment
-
BCIP230M 10KHz- 230MHz Bulk Current Injection Probe IEC 61000-4-6
SKU: 12148
Frequency range: 10 kHz - 230 MHzInner diameter (I.D.): 1.50" ( 38 mm )App Note: Bulk Current Injection (BCI) Test SetupMaximum input power: 200 WattsMax current field ( @400 MHz ): 500 mA$195.00 - $2,750.002 Left -
BCIP400M Bulk Current Injection Probe
SKU: 11910
Frequency range: 10 kHz up to 400 MHzInner diameter: 1.06" (27 mm)Applications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingPower Rating: 350 mAInsertion Loss: 5 dB typ.; 50 Ohm system (100 Ohm loop impedance)Typically In Stock -
AE Techron DSR 100 Ripple Generator and AC/DC Voltage Source
SKU: 11769
Test Standards: ISO 7637-4, ISO 21498Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesFrequency Range: DC - 300 kHzOutput Current: up to 400 AmpsTypically In Stock -
Narda PMM EP-603 300 kHz - 18 GHz Isotropic E-Field Probe
SKU: PMM EP-603
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.17 - 170 V/m (0.01 V/m)Frequency Range: 300 kHz to 18 GHzStandards Met: IEC/EN 61000-4-3Interfaces: Fiber-Optic -
EM Test CWS 500N4 Common-Mode Disturbance Simulator for IEC 61000-4-16 & IEC 61000-4-19
SKU: 1254
Weight: Approx. 30kgDimensions: 555mm x 448mm x 286mmFrequency Range: 10Hz to 165kHzMax input power: 600 WattsOutput: For output characteristics reference data sheetInquire for Availability -
California Instruments 5001iX Flicker & Harmonics Generator
SKU: 6723
Current rating: 120 ampsVoltage ranges: 150-300 VoltsTest Standards: IEC/ISO 60601-1-2, IEC 61000-3-2, IEC 61000-3-3, IEC/EN61000-4-7, IEC/EN61000-4-15Applications: Flicker and Harmonics TestingTypically In Stock -
Yokogawa WT1800 High Performance Power Analyzer
SKU: 12351
Input Elements: 5Max Current (per Channel): 5 AmpsMax Voltage (per Channel): 1,000 VoltsOptions: B5, G5, DTHarmonic Measurement Standards: EN/IEC 61000-3-2, EN/IEC 61000-3-12$695.00 - $2,795.00IN STOCK -
EM Test AIF 503N32.1 3-Phase Flicker Impedance Network
SKU: sku-1917
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and moreApplication/Test Type: Medical Device EMC TestingBuilt-in Power Analyzer: EM Test DPA 503NCurrent Handling: 32 Amps per phaseRENTAL ONLY -
EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11
SKU: 1144
Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: AC up to 240V/16A$4,750.001 Unit -
Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133
SKU: 11050
Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2Applications: EMC Surge, CE Marking, Surge ImmunityMax EUT AC Voltage (W/ Built In CDN): 690 VoltsMax EUT AC Current (W/ Built In CDN): 32 AmpsMax EUT DC Voltage (W/ Built In CDN): 270 Volts$5,975.001 System Left -
Thermo Keytek E510A 10kV Surge Generator
SKU: 10799
Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5Phase synchronization: ±15° with optional coupler/decouplerPulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%Pulse repetition: 1 shot/18 secondsPulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt stepsTypically In Stock -
3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4
SKU: 10621
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Cable Diameter: up to 40 mm (1.57 in)Coupling Length: 1 m (39.4 in)Dimensions: 1040x140x110mmEFT Coupling Clamps: as per IEC 61000-4-44 to 6 Weeks