-
Com-Power LI-3P-2100 9kHz - 30MHz Three Phase LISN for CISPR / ANSI
SKU: sku-895
Frequency Range: 9 kHz – 30 MHzInductors: 50Ω, 50/250 μH +5Ω, (4) Conductor NetworkMains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power JackRF Connector: RF Measurement Port 50Ω – N-Type (female)Standards Met: ANSI C63.4, CISPR 16-1-2 -
Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC
SKU: 11665
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 16 AmperesDimensions: 19.3” x 13.9” x 2.3"Frequency Range: 9 kHz to 30 MHz$445.00SHIPS IN 3-5 DAYS -
Com-Power LI-3P-232 Three Phase LISN for CISPR / ANSI
SKU: sku-893
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent rating: 32 AmperesDimensions: 19.3” x 13.9” x 2.3″Frequency Range: 9 kHz – 30 MHz -
Com-Power LI-400C 10 kHz - 10 MHz LISN for Mil-STD 461
SKU: 7281
EUT Current Handling: 25 AmpEUT Voltage Handling:: 270 VAC ( Line to Ground ), 380 VDCApplications: Conducted Emissions, Military EMC TestingTest Standards: MIL-STD-461Inductors: 50 μH ( air-core )In Stock -
Com-Power LIN-120A LISN for CISPR 16-1-2/ANSI C63.4 w/ built-in Transient Limiter
SKU: sku-15
Weight: 10 lbs (4.5 kg)Application/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amps AC (rms) , 14 Amps DCDimensions: 6.6” x 14.3” x 13” (16.8 x 36.3 x 33 cm)Frequency Range: 150 kHz to 30 MHz -
Com-Power LIN-120C Line Impedance Stabilization Network
SKU: sku-889
Weight: 10 lbs (4.5 kg)Application/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amps AC (rms) , 14 Amps DCDimensions: 6.6” x 14.3” x 13” (16.8 x 36.3 x 33 cm)Frequency Range: 150 kHz to 30 MHz -
Com-Power LIT-153A 150kHz to 30MHz Transient Limiter
SKU: sku-446
Connector: N type (input and output)Dimensions: L 3.0” (75 mm) W 1.25” (32 mm) H 1.25” (32 mm)Frequency Range: 150 kHz - 30 MHzInput: 2 Watts CW (+33 dBm) ±10 VdcInsertion Loss: 10 dB +1.5 / -0.5 dB*$430.00 -
Com-Power LIT-930A 9kHz to 30MHz Transient Limiter
SKU: 8409
Connector: N type (input and output)Dimensions: L 4.3” (100 mm) W 2.0” (50 mm) H 1.5” (35 mm)Frequency Range: 9 kHz - 30 MHzInput: 4 Watts CW (+36 dBm) ±50 VdcInsertion Loss: 10 dB +1.5 / -0.5 dB*$70.00Typically In Stock -
Com-Power PAM-118A High Gain EMC Broadband Preamplifier
SKU: 10217
Weight: 2.5 lbs (1.1 3Kg)Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.Connector: 50Ω Precision N-type (female)Dimensions: 7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)Frequency Range: 500 MHz - 18 GHzInquire for Availability -
Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz
SKU: sku-216
Weight: 3.3 lbs. (1.5 kg)Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC MeasurementsConnector: 50Ω N-Type (f)Dimensions: 7.5 x 5 x 3 inchesFrequency Range: 1 GHz - 6 GHz -
-
Com-Power CDN-M350E 150 kHz to 230 MHz Coupling Decoupling Network
SKU: 30077
Application/Test Type: RF Conducted Immunity TestingCurrent Rating: 50 AmpsFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: 5.2 mm banana socket with shrouded sheathRF Connector: 50 Ω BNC (Female)Inquire for Lead Time