Categories
Test Equipment
-
-
Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable
SKU: 10141
Weight: approx. 3.4 kgDimensions: (LxWxH): 670 mm x 78 mm x 58 mmFrequency Range: 1 MHz to 1 GHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-20;CISPR 13;CISPR 14-1;CISPR 15;CISPR 16-1-4;CISPR 16-2-3;CISPR 22;CISPR 32;EN 61000-6-3;EN 61000-6-4;IEC 60533$195.00 - $995.00In Stock -
Teseq CMAD 10 Common Mode Absorption Device for CISPR 22
SKU: sku-140
Weight: approx. 1.7 kgApplication/Test Type: Disturbance mode testing ideal for GTEM test cells for radiated emission and immunity testing.Dimensions: (LxWxH): 293 mm x 63 mm x 40 mmFrequency Range: 30 MHz to 1000 MHzStandards Met: IEC/EN 61000-4-20 -
Teseq CVP 2200A Capacitive Voltage Probe
SKU: sku-139
Frequency Range: 150 kHz to 30 MHzRF Connector: BNC 50 Ω, female -
Teseq PCJ 9201B Probe Calibration Jig
SKU: 11132
Weight: 4.5 Kgs (10 lbs)Dimensions: 26.0 cm x 18.1 cm x 15.0 cm (Max Probe Diameter: 11.5 cm; Min Probe Window Diameter: 1.6 cm; Max: 6.7 cm)Frequency Range: DC to 400 MHzImpedance: 50 OhmsRF Connector: N-type -
Teseq VBA 6106A Biconical Antenna 30 MHz - 300 MHz
SKU: sku-131
Weight: approx. 1.3 kgDimensions: (L x H x W in mm): approx. 1360 X 770 X 515Frequency Range: 30 MHz to 300 MHzImpedance: approx. 6 kgRF Connector: N type female -
Teseq DPA 4000A Compact Biconical Antenna 200 to 1000 MHz
SKU: sku-127
Weight: 690 gDimensions: (L x W x H): 185 mm x 400 mm x 155 mmFrequency Range: 200 MHz to 1000 MHzImpedance: 50 Ω, nominalRF Connector: N female -
Teseq DPA 3000 Biconical Dipole Antenna 800 to 2800 MHz
SKU: sku-125
Impedance: 50 OhmsWeight: 180 gramsAntenna Factor (1 Meter): 30 dB/m to 38 dB/m (0.8 GHz to 2.5 GHz)Antennas: Dipole AntennasConnector: N female -
Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6
SKU: sku-122
Weight: approx. 5.5 kgDimensions: 670 mm x 100 mm x 79 mmFrequency Range: 150 kHz to 1000 MHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326 -
Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6
SKU: sku-119
Weight: approx. 7 kgApplication/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)Connector: N-type femaleDimensions: 647 mm x 130 mm x 105 mm -
Teseq INA 6501 Manual Step Transformer for AC Dips & Interruptions
SKU: sku-116
Accuracy: ±5%Input voltage UIN: 0 to 250 VAC, 50/60 HzOutput voltage UVAR: 4 steps: 0% - 40% - 70% - 80% of UINVoltage change with load: 00% output, 0 to 16 A less than 5%; 80% output, 0 to 20 A less than 5%; 70% output, 0 to 23 A less than 5%; 40% output, 0 to 40 A less than 5%$2,060.00 -
$2,495.00