Categories
Test Equipment, Systems & Solutions
-
Rohde & Schwarz (R&S) NRP-Z55 Thermal Power Sensor
SKU: sku-714
RF Field Probe Connector: 2.92 mm connectorRF Field Probe Frequency Range: DC to 44 GHzRF Field Probe Maximum Input Power: 10 W (PK, 1 µs)RF Field Probe Measurement Accuracy: Measurement range: –35 dBm to +20 dBmSupply Voltage: Operation with R&S®NRP2 base unit or via USB on a Laptop/PC$295.00 -
Used Amplifier Research PM2002 10 kHz - 40 GHz, -70dBm to +44dBm Power Meter
SKU: sku-706
Weight: 7 lbs (3.2 kg)Dimensions: 8.25 in (21.0 cm) wide, 3.5 in (8.9 cm) high, 13.25 in (33.7 cm) deepRF Field Probe Connector: Inputs: Rear panel HEAD connectors and rear panel IEEE-488 connector standard. Outputs: Rear panel PWR/REF connector, 0dBm, 50 MHz. Rear panel RECORDER BNC connector, 0 to 10V into 1mW.RF Field Probe Frequency Range: 10 kHz-40 GHz, power head dependentRF Field Probe Maximum Input Power: May be operated into 1kW or 1V fsRF Field Probe Power Measurement Range: -70dBm to +44dBm, power head dependent -
Amplifier Research 100A400A 10 kHz - 400 MHz, 100 Watt RF Amplifier
SKU: sku-704
Flatness: FLATNESS: ±1.0 dB typical, ±1.5 dB maximumFrequency Range: 10kHz–400MHzGain: 50 dBApplication: BCI TestingInput: 100-240 VAC, 50/60Hz, 500 wattsOutput: 125 watts, Minimum: 100 wattsRF Input Voltage: 1.0 milliwatt maximum for rated outputTypically In Stock -
Rohde & Schwarz (R&S) RTE1204 Digital Oscilloscope, 2 GHz, 4 channels, 5 Gsample/s, 10/40 Msample
SKU: 30048
Bandwidth: 2 GHzRealtime sampling rate: max. 5 Gsample/s on each channelTrigger types: edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, serial bus trigger (optional)Channels: 4$950.00Inquire for Availability -
Rent RF Conducted Immunity Test System per IEC 61000-4-6
SKU: 0699
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 100VrmsBCI Test Levels (w/ built-in amplifier): 30VFrequency Range (w/ built-in amplifier): 9 kHz - 1 GHzApplications: CE Marking, EMC Precompliance TestingIN STOCK -
FCC F-120-9A Bulk Current Injection Probe
SKU: 8567
Test Standards: IEC 61000-4-6Frequency Range: 10 kHz - 230 MHzMaximum Input Power: 125 WattsAperture: 1.57"Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing$595.00In Stock -
Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1
SKU: 11695
Frequency Range: 9 kHz to 3.6 GHzSSB Phase Noise: –90 dBc (1 Hz) (typ.)Frequency Response: 9 kHz ≤ f < 100 kHz < 4 dBDynamic Range: RBW = 1 kHz, f > 10 MHz 110 dBHarmonics, nonharmonic spurious: output level = –10 dBm –30 dBcRF Output Connector: N female, 50 ΩTest Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCCInquire -
Noiseken INS-420R Impulse Noise Generator up to 4 kV w/ D-Stub Remote Control
SKU: 116891
Weight: 30 kgDimensions: W 430 x H 350 x D 470mmPolarity: positive / negativePulse voltage (open circuit): 0.01 ~ 4.00kV±10% at 0.01kV stepRepetition time: 16ms ~ 999ms±10%Supply Voltage: AC 100V~240V±10%, 50/60Hz±10%Inquire for Availability -
-
TEM 200 Waveguide Cell, DC-200 MHz for ISO 11452-3
SKU: sku-687
Weight: Approx. 40KgDimensions: 200x95x62cmFrequency Range: DC-200 MHzImpedance: 50 OhmsMax input power: 1.5 kWRF Connector: Type N,Voltage Rating: Field for a 25W amplifier: 118V/mVSWR: less than 1.1 -
GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding
SKU: 30180
Ideal for: voltage bleeding to Ground Plane during Indirect ESD Immunity TestingCompliant to: IEC 61000-4-2, ISO 10605, DO-160, Mil-STD CS118 and more.Cable rated to: 40kV High Voltage Cable (150 degrees C)Length: 1.5 Meters (5 Feet)Resistance: HV Precision Resistors (1% tolerance)$198.99In Stock -
Rohde & Schwarz NRP6A Average Power Sensor, 8 kHz - 6 GHz
SKU: 10679
Frequency Range: 8 kHz to 6 GHzRF Power Range: 100 pW to 200 mW (–70 dBm to +23 dBm)Max Average Power: 1 WattPeak Envelope Power: 2 Watts for 10 µs (then Kaploowee)Typically In Stock