(Showing 12 of 1980)
Show 12 24 36 48 96

Categories

EMC Test Equipment
EMC Test Equipment
EMI Test Setup
EMI Test Setup
EMC Standards
EMC Standards
Application/Test Type
Application/Test Type
Shielded Enclosures
Shielded Enclosures
RF Test Equipment
RF Test Equipment
Electronic Test Equipment
Electronic Test Equipment
Antenna Pattern Measurement Equipment
Antenna Pattern Measurement Equipment
Anechoic Chamber Materials
Anechoic Chamber Materials
Software for EMC Testing
Software for EMC Testing
Top Manufacturers
Top Manufacturers
Clearance
Clearance
EMC Test Systems

Test Equipment, Systems & Solutions

  • Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

    Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6

    SKU: 10828

    Weight: 1.5 kg (3.3 lbs)
    Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cables
    Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
    Current Rating: 250 mA (CDN ST08 1 Amp)
    Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
    Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
    Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHz
    Mains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)
    RF Connector: BNC 50 Ω
    RF Input Voltage: 20 Volts Max
    Standards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2
    Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)
    Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
    $1,190.00
  • Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

    Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

    SKU: 10827

    Associated Equipment: RF Conducted Immunity Test Systems
    Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)
    Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
    Current Rating: 16 Amps
    Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB
    Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
    Frequency Range: 150 kHz to 230 MHz
    Insertion Loss: Less than 0.1 dB
    Mains & EUT Connections: 4 mm banana
    RF Connector: BNC 50 Ω
    RF Input Voltage: 30 Volts (Max)
    Standards Met: IEC/EN 61000-4-6
    Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
    Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec
    $195.00
    Typically In Stock
    Ordering Options
  • Fischer F-35A 100 Hz – 108 MHz Current Monitor Probe

    Fischer F-35A 100 Hz – 108 MHz Current Monitor Probe

    SKU: 1819

    Aperture: 32 mm
    Connector type: Type-N
    Dimensions: Internal diameter: 32 mm External diameter: 98 mm Height: 38 mm
    Frequency range: 100 Hz – 100 MHz
    General Data: Technical Details
    High frequency 3dB cut-off: 108 MHz
    Low frequency 3dB cut-off: 100 Hz
    Maximum peak current: 100 Amps
    Output resistance: 50 Ohms
    Probes: Current monitoring
    $195.00
    In Stock
    Ordering Options
  • Teseq NSG 4070C-80 Integrated Signal Generator, 4 kHz to 1 GHz, 80 W Integrated Class A Power Amplifier

    Teseq NSG 4070C-80 Integrated Signal Generator, 4 kHz to 1 GHz, 80 W Integrated Class A Power Amplifier

    SKU: sku-809

    Test Capabilities: RF Conducted Immunity
    Standards Met: IEC/EN 61000-4-6
    Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
    CDN Test Levels (w/ built-in amplifier): 40Vrms
    BCI Test Levels (w/ built-in amplifier): 8Vrms
    Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz
    Typically In Stock
    View Product Cart
  • Amplifier Research PM2003 Power Meter, 3 Channel, 10 kHz - 40 GHz, -70dBm to +44dBm

    Amplifier Research PM2003 Power Meter, 3 Channel, 10 kHz - 40 GHz, -70dBm to +44dBm

    SKU: sku-805

    Weight: 7 lbs (3.2 kg)
    Dimensions: 8.25 in (21.0 cm) wide, 3.5 in (8.9 cm) high, 13.25 in (33.7 cm) deep
    RF Field Probe Connector: Inputs: Rear panel HEAD connectors and rear panel IEEE-488 connector standard. Outputs: Rear panel PWR/REF connector, 0dBm, 50 MHz. Rear panel RECORDER BNC connector, 0 to 10V into 1mW.
    RF Field Probe Frequency Range: 10 kHz-40 GHz, power head dependent
    RF Field Probe Maximum Input Power: May be operated into 1kW or 1V fs
    RF Field Probe Power Measurement Range: -70dBm to +44dBm, power head dependent
    View Product Cart
  • Noiseken LSS-15AX Series Lightning Surge Simulator up to 15kV

    Noiseken LSS-15AX Series Lightning Surge Simulator up to 15kV

    SKU: sku-800

    Weight: 200 kg.
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Coupling: AC/DC lines CDN, and Telecom lines CDN
    Dimensions: 555 X 1250 X 790 mm
    Impedance: 2 Ohm
    Mains & EUT Connections: 4mm banana plug
    Phase synchronization: 0°-360°, 1°step or random
    Polarity: Positive, Negative, Alternate
    Pulse current (short circuit): 15kV/7500A
    Pulse repetition: 20 sec
    Pulse voltage (open circuit): 15kV/7500A
    Standards Met: IEC 61000-4-5
    Inquire for Availability
    View Product Cart
  • Schloder VIS 1700 Voltage Interruption Simulator

    Schloder VIS 1700 Voltage Interruption Simulator

    SKU: sku-784

    Communication: BNC outputs (on rear) for voltage, current and scope triggering
    Coupling: BNC
    Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
    General Data: Technical Details
    Mains & EUT Connections: 4mm banana line
    Output Current: AC max. 280 V, DC max. 3 6 0 V
    Peak inrush current capability: 16 Amps
    Phase synchronization: at any phase position 0° - 360 °
    Test duration: 0.1sec - 9990sec, furthermore single event and continuous operation
    Test Voltage: AC max. 280 V ,DC max. 3 6 0 V
    Typically In Stock
    View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form