(Showing 12 of 1980)
Show 12 24 36 48 96

Categories

EMC Test Equipment
EMC Test Equipment
EMI Test Setup
EMI Test Setup
EMC Standards
EMC Standards
Application/Test Type
Application/Test Type
Shielded Enclosures
Shielded Enclosures
RF Test Equipment
RF Test Equipment
Electronic Test Equipment
Electronic Test Equipment
Antenna Pattern Measurement Equipment
Antenna Pattern Measurement Equipment
Anechoic Chamber Materials
Anechoic Chamber Materials
Software for EMC Testing
Software for EMC Testing
Top Manufacturers
Top Manufacturers
Clearance
Clearance
EMC Test Systems

Test Equipment, Systems & Solutions

  • Schwarzbeck BBV 9744 Broadband Preamplifier

    Schwarzbeck BBV 9744 Broadband Preamplifier

    SKU: sku-1246

    Frequency Range: 9 kHz – 6 GHz
    Noise figure: typ. 2.5 dB (1.0 GHz)
    Gain: typ. +28 dB
    Amplitude flatness: typ. < +/- 3 dB
    Impedance: 50 Ω
    VSWR Input / Output typ.: < 2 : 1
    Power supply: + 10-15 V, 120 mA
    Connectors: N-Type Flange
    Inquire for Availability
    View Product Cart
  • Com-Power CLCI-100 Bulk Current Injection Probe for 10 KHz to 100 MHz

    Com-Power CLCI-100 Bulk Current Injection Probe for 10 KHz to 100 MHz

    SKU: sku-384

    Weight: 4.5 lbs. (2.04 Kg)
    Aperture: 1.575” (40 mm)
    Application/Test Type: Conducted and Radiated Susceptibility Testing
    Dimensions: Window Diameter: 1.575” (40 mm) Outside Diameter: 5.75” (146 mm) Width: 2.75” (70 mm)
    Frequency Range: 10 KHz to 100 MHz
    RF Connector: N-Type (female)
    Standards Met: EC 61000-4-6 and CISPR 16-1-2
    View Product Cart
  • Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing - The EMC Shop

    Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing

    SKU: 345

    Weight: Generator : Approx. 4.8kg Discharge gun : Approx. 800g ( excluding cable and connector)
    Standards Met: IEC 61000-4-2, ISO 10605
    Air Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）
    Battery: AC100V to AC240V ±10% 50Hz／60Hz 62VA
    Contact Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）
    Polarity: positive/negative
    Pre-Programmed IEC Levels: Yes
    Resolution: Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step
    Typically In Stock
    View Product Cart
  • Teseq CBL 6112D Bilog Antenna, 30 MHz to 2 GHz, 300 Watts CW

    Teseq CBL 6112D Bilog Antenna, 30 MHz to 2 GHz, 300 Watts CW

    SKU: 10112

    Impedance: 50 Ohms
    Weight: approx. 4.2 kg (9.25 LB's)
    Antenna Factor (1 Meter): 7 to 27 dB/m
    Antennas: Bilogical Antennas
    Application/Test Type: VHF radio approval applications, Compliance Emission Testing
    Connector: N type female
    Dimensions: (L x H x W in mm): approx. 1530 X 1390 X 630
    Frequency Range: 30 MHz to 2 GHz
    Gain: 6 dB (200 MHz to 700 MHz), 8 dB (700 MHz to 2000 MHz)
    Impedance-2: 50 Ω
    Maximum Continuous Power: 300 Watts (80 MHz - 2 GHz)
    Standards Met: IEC/EN 61000-4-3, CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 24, CISPR 32, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC 60533, IEC 60601-1-2, IEC 61326, ISO 11452-2
    VSWR: Average 2:1
    Inquire for Availability
    View Product Cart
  • PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC - The EMC Shop

    PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

    SKU: 8784

    Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 Hz
    Current Rating: 32 Amps with IEC plug; 16 Amps with Schuko plug
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connector
    RF Connector: BNC (f)
    Standards Met: VDE 0876, CISPR 16-1-2, FCC Part 15
    Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)
    Additional Standards Met: DO-160F, CISPR 22, ANSI C63.4
    Typically In Stock
    View Product Cart
  • Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

    Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

    SKU: sku-306

    Weight: 14 kg
    Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, Household
    Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
    Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)
    Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periods
    Coupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)
    Dimensions: 450mm x 130mm x 570mm
    General Data: Technical Details
    Polarity: positive / negative / alternate
    Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)
    Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kV
    Standards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2
    Supply Voltage: 85 ... 264 VAC, 150 VA, 50 / 60 Hz
    Test duration: 0 s … 8 h per path
    View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form