Categories - Page 141 - The EMC Shop

Test Equipment, Systems & Solutions

Teseq JT 5550 Load Dump Generator

SKU: JT 5550

Inquire for Availability

VIEW PRODUCT Cart
Teseq NSG 5500-2 Automotive Immunity Expandable Test System up to Five Transient Modules

SKU: sku-160

Applications: Automotive Electrical Disturbances, EV EMC Testing

Standards Met: ISO 7637

Max EUT DC Voltage (w/ Built In CDN): 60 Volts

Max EUT DC Current (w/ Built In CDN): 30 Amps

Peak Inrush Current Capability: 300 Amps

Pre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a,3a/3b 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T

VIEW PRODUCT Cart
Frankonia CIT-10 RF Conducted Immunity Test System

SKU: 6886

Test Capabilities: RF Conducted Immunity

CDN Test Levels (w/ built-in amplifier): 30Vrms

BCI Test Levels (w/ built-in amplifier): 200mA

Standards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4

Applications: Bulk Current Injection Testing, RF Conducted Immunity

Cost New:

Was:

Price Now:

$16,500.00

In Stock
AH Systems AK-18G Antenna Kit for FCC, MIL-STD, VDE and TEMPEST Testing up to 18 GHz

SKU: 7149

Applications: Radiated Immunity, Radiated Emissions

Standards Met: FCC, MIL-STD-461, VDE, TEMPEST Testing

Antenna Case Dimensions: 28" x 23" x 10"

Tripod Case Dimensions: 46" x 8" Diameter

Inquire for Availability

VIEW PRODUCT Cart
Fischer FCC F-120-9 Bulk Current Injection Probe

SKU: 3729

Frequency Range: 10 kHz – 230 MHz

Input Power Rating: 100 Watts

Inner Diameter: 40 mm

Outer Diameter: 127 mm

BCI Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

Applications: Bulk Current Injection Testing

Cost New:

Was:

Price Now:

$295.00

In Stock

ORDERING OPTIONS
EMC Partner CDN-KIT1000 ED3

SKU: 35425

Standard: IEC 61000-4-5

Application: surge on 2 unsymmetrical lines

Test level surge: max. 6 kV

EUT voltage per line: max. 200 V DC or 240 V peak

EUT current per line: max. 4 A cont. or 5 A for 5 min.

Typically In Stock

VIEW PRODUCT Cart
Com-Power LI-350 Line Impedance Stabilization Network

SKU: 10425

Weight: 6 lbs. / 2.7 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 50 Ampere AC, 35 Ampere DC

Dimensions: 15.4 x 7 x 6.6 inches / 39.1 x 17.7 x 16.7 cm

Frequency Range: 10 kHz to 400 MHz

Inductors: 5 µH (air-core)

Insertion Loss: 0.2 dB (150 kHz to 30 MHz)

Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

RF Connector: 50Ω N-type (female)

Standards Met: RTCA DO-160 / MIL-STD 461F

Voltage Rating: 480 VAC (Line to Ground), 676 VDC

Inquire for Availability

VIEW PRODUCT Cart
Teseq INA-5511-VK Automotive Transient Verification Kit

SKU: 11838

Standards Met: ISO 7637-2, ISO 16750-2

Compatible Generator: Teseq NSG 5500, 3ctest TIS 700, EM Test UCS200N

Inquire for Availability

VIEW PRODUCT Cart
Schwarzbeck VULB 9161 SE TRILOG Broadband Antenna

SKU: 11821

Frequency Range: 30 MHz - 2 GHz

Max Power: 1 kW

Polarization: linear

Connector: N - Type

Inquire for Availability

VIEW PRODUCT Cart
Cuming Microwave C-RAM CFC High Performance Cleanroom RF Absorber

SKU: sku-1552

VIEW PRODUCT Cart
Haefely PCD 130 3 Phase Coupling/Decoupling Network for PSURGE 8000

SKU: sku-444

Weight: 69 kg (net weight)

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Coupling: 3 Phase - 32 Amps, 690 VAC

Dimensions: 45 x 50 x 57 cm (W x H x D)

General Data: Technical Details

Phase synchronization: 1° steps

Polarity: pos / neg

Pulse current (short circuit): 32A RMS

Pulse voltage (open circuit): 690V RMS (Phase-Phase) 110V DC

Standards Met: IEC 61000-4-5 Ed. 1 & 2 and ANSI C62.41 and C62.45

In Stock

VIEW PRODUCT Cart
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

SKU: 10413

Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz

Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%

Source Impedance: 50 ohm ±20%

Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%

Burst Duration: At least 2s

Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

Frequency: 100 kHz ± 10%

General Data: Technical Details

Impedance: 12ohm and 30ohm ± 20%

Oscillation Frequency-2: 100kHz and 1MHz ± 10%

Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;

Polarity-2: Positive, negative

Pulse repetition: 1 to 60 transients per minute

Repetition Rate: Max. 5,000 /s ±10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Source impedance: 200ohm ± 20%

Spike frequency: 100kHz ± 10%

Test Voltage: 250 V - 6,000 V ± 10%

Equipment Group: Ring Wave Generators/Simulators

Inquire

VIEW PRODUCT Cart