Categories
Test Equipment
-
Maturo TT2.0WF Turntable
SKU: sku-1410
Diameter: 6.5 ftLoad Capacity: 1100 LbsHeight: 5.5"Control: Fiber and GPIBWeight: 400 Lbs -
Schwarzbeck NFPA 9730 Power Amplifier DC - 250 kHz
SKU: 30020
Frequency Range: DC to 250 kHzGain at 8 Ω impedance: 28 ArmsContinuous Operating Current (AC): 0.25 Ω @ AC>15 HzDC Max. Current Output: 20 A (Load impedance 1.0 Ω min.)Input Resistance (typical): 1 kΩInquire for Availability -
Haefely FP-COMB 32 Automatic 3-Phase Coupler for AXOS System
SKU: sku-786
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Pulse amplitude: 5 kVVoltage: 7 kVCompatible Impulse Generators: Haefely AXOS5, Haefely AXOS8Typically in Stock -
EM Test Netwave 3.1 Programmable AC/DC Power Source
SKU: sku-748
Frequency Range: DC - 5,000 HzTest Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreApplications: Flicker and Harmonics TestingInquire for Availability -
Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz
SKU: 30151
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB$410.00 - $4,100.00Typically in Stock -
EM Test UCS500N7 Multifunctional Transient Immunity Simulator
SKU: sku-241
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsEMC Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11Test Setup Guides: Electrical Transient and Noise, Surge Immunity, Power FailuresEFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kACombination/Wave Surge Output Capability: 250 V - 6,000 V ± 10%Inquire for Availability -
TTi PSA6005 Handheld Spectrum Analyzer 6 GHz
SKU: 5290
Frequency Range: 10 MHz to 6 GHzPhase Noise (Typical): -83 dBc/Hz at 30 kHz offset, -97 dBc/Hz at 100 kHz offset, -114 dBc/Hz at 1 MHz offsetDisplay Range: 84 dB from reference levelFlatness: Better than ± 1 dB relative to 2000MHz over the the full operating frequency rangeDisplayed Average Noise Level: Better than – 120 dBm (-13 dBuV) average displayed noise floor$435.00 - $4,335.00In Stock -
Amplifier Research 100W1000B 1 MHz - 1 GHz
SKU: 8287
Frequency Range: 1 MHz - 1 GHzOutput Power: 100 WFlatness: ±2.0 dB maximum, 1.5 dB typical, ±0.8 dB with internal levelingGain: 50 dB minimum (at max setting)Input Impedance: 50 ohms, VSWR 2.0:1 maximumTypically In Stock -
Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz
SKU: sku-2308
Max Frequency: 30 MHzMin Frequency: 100 kHzOutput Power: 800 Watts PulseApplications: Particle, Plasma, Magnetic, Radar, NMR, MRI, EPR, ESR,ENDOR and NQRAC Input Power: 110-240V/1PH/1kVA -
EFP18G 3-Axis E-Field Probe 3 MHz - 18 GHz
SKU: 12189
Weight: 0.2 lb, 100 gDimensions: (LxD): 9.0x2.25 inch, 230x58 mmFrequency range: 3 MHz-18 GHzApplications: RF Interference Analysis and EMF SniffingConnector Type: SMA(f)$4,860.00In Stock -
SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m
SKU: sku-2122
Connector: N-Type, femaleFrequency Range: 20 MHz to 330 MHzImpedance: 50 ohmMax Radiated Field Strength: 200 V/mStandards Met: MIL 461 -
