Categories - Page 117 - The EMC Shop

Test Equipment, Systems & Solutions

Com-Power CGO-505 Comb Generator 5 MHz - 1 GHz in 5 MHz step

SKU: 0659

AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz

Antennas: 5 and 12 inch Monopole

Application/Test Type: EMI Radiated Site Reference Source

Battery: 6V NiMH, 1 Ah

Dimensions: 7 x 0.75 inches / 17.7 x 1.9 cm

Frequency Range: 5 MHz to 1 GHz in 5 MHz steps

Operation Time: 18 Hours Typical With Fully Charged Battery

Polarity: Vertical and Horizontal

Cost New:

Was:

Price Now:

$395.00 - $3,275.00

Typically in Stock

ORDERING OPTIONS
ETS-Lindgren 7405 E & H Near Field Probe Set

SKU: sku-396

Weight: 2 lbs (0.91 kg)

Current Rating: 800 mA (per line), 1.6 Amps (per pair)

Dimensions: 10.8” x 4.5” x 3.8” (275 mm x 115 mm x 96 mm)

Frequency Range: 150 kHz to 3 GHz

Isolation: 150 kHz to 1.5 MHz: 35 dB to 55 dB (increasing linearly with the log of freq.) 1.5 MHz to 30 MHz: 55 dB

Mains & EUT Connections: D-sub 25 pin female connectors

RF Connector: 50Ω N-type (female)

Standards Met: EN 55022 (CISPR 22), CISPR 16-1-2

Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

VIEW PRODUCT Cart
Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler

SKU: 11294

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Burst frequency: 0.1 kHz - 1,000 kHz

Burst time: Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuit

Coupling: Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)

Mains & EUT Connections: HV Coax (Direct); L, N and PE via Coupler

Phase synchronization: Asynchronous/synchronous 0 - 360° ±2°

Polarity: Positive/Negative

Pulse amplitude: 200 Volts - 4.5 kV (20 Volt Steps)

Repetition time: 100ms to 10s

Test duration: 1 to 150 pulses (15ms burst duration as per IEC 61000-4-4 up to 10 kHz)

Cost New:

Was:

Price Now:

$975.00 - $6,750.00

In Stock

ORDERING OPTIONS
Teseq INA 701 Magnetic Field Coil for IEC 61000-4-8 and IEC 61000-4-9

SKU: 30172

Max. Contin. Frequency Current Supply: 10 A

Max. Short Term Frequency Current Supply: 30 A (3 s)

Max. Contin. Frequency Field Strength Supply: 330 A/m

Max. Short Term Frequency Field Strength Supply: 11100 A/m

Applications: Radiated Immunity

Test Standards: EN/IEC 61000-4-8, EN/IEC 61000-4-9

Inquire for Availability

VIEW PRODUCT Cart
Solar 8616-5-TS-200-N 5uH EMI LISN

SKU: SOLA-8616-5-TS-200-N

Test Standards: MIL-STD-462, DO-160, FCC Part 18

Applications: Military EMC Testing, Conducted Emissions Testing

Max Current: 100 Amps

Frequency Range: 10 kHz – 30 MHz

Coupling Capacitor: 0.25 µF

RF Connector: N-Type(f)

Inductance: 5 µH

Videos: Debugging Failures

Typically In Stock

VIEW PRODUCT Cart
Schwarzbeck TEMP 8400 Tempest AMN (LISN)

SKU: 6991

Frequency Range: 9 kHz - 1 GHz

Max. cont. current: 16 A, 25 A (Limited time, 15 mins)

Max Voltage (DC to 400 Hz): 250 V AC

Insertion loss (EUT – AE): Typ. 25 - 60 dB

Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

Cost New:

Was:

Price Now:

$7,945.00

Typically In Stock
EMC Partner IMU-MGS Transient Generator

SKU: 11129

Conducted Immunity Setup and Testing: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst

Test Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

Output Levels: up to 5kV

Cost New:

Was:

Price Now:

$1,195.00 - $2,295.00

Typically In Stock

ORDERING OPTIONS
Haefely PIM 100 Combination Wave Impulse Module

SKU: 10297

Output: Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse) up to 7.8kV

Coupling (Max EUT Power): 3 Phase - 100 Amps, 690 VAC

Test Standards: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

Applications: Surge immunity - Combo Wave, Ring Wave and Oscillatory Waves, EMC Precompliance Testing

Pulse current (short circuit): 0.1 – 3.7 kA ±10% (8 us ±20% risetime)

Pulse repetition: 10 seconds / 6 per minute

Features: Impulse voltage and current monitors

In Stock

VIEW PRODUCT Cart
Teseq NNB 51 Line Impedance Stabilization Network Dual-Line-V-LISN

SKU: 10154

Weight: 12 kg (26.5 pounds)

Application/Test Type: Measure distortion signals on power mains, EMC Precompliance, Conducted Emissions

Current Rating: 16 Amps Max

Frequency Range: 9 kHz to 30 MHz

RF Connector: N female

RF Input Voltage: 250 Volts max

Standards Met: CISPR 16-1-2, MIL-STD-461, FCC Part 15, ANSI C63.4

RENTAL ONLY

VIEW PRODUCT
Com-Power LI-550A Line Impedance Stabilization Network (LISN)

SKU: 10114

Weight: 14 lbs. / 6.3 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 50 Amps (AC), 35 Amps (DC)

Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm

Frequency Range: 100 kHz to 108 MHz

Inductors: 5 µH (air-core)

Insertion Loss: 1.5 dB (150 kHz to 30 MHz)

Isolation: 20 - 40 dB (100 kHz to 3 MHz) 40 dB ( 3 MHz to 30 MHz)

Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 25 / CISPR 16-1-2

Voltage Rating: 270 VAC (Line to Ground), 380 VDC

Cost New:

Was:

Price Now:

$175.00 - $1,975.00

1 Set

ORDERING OPTIONS
Noiseken INS-4040 Impulse Noise Simulator

SKU: 8882

Test Standards: IEC 61000-4-4, MIL-STD-461 CS115

Applications: EFT/Burst, EMC Precompliance, BCI Testing

Pulse Widths: 10ns, 50ns, 100ns, 200ns, 400ns, 500ns, 800ns and 1000ns

Output Voltage: 0.01~2.00kV ±10% with 50Ω Load

EUT Power Handling: AC240V Single phase, DC60V, 16A

Typically In Stock

VIEW PRODUCT Cart
EMC PARTNER IMU-MGE EFT/BURST, SURGE, RINGWAVE AND 10/700US IMPULSE GENERATOR

SKU: 11126

Test Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

Setup Information: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst

Impulse Levels: up to 8 kV

Inquire for Lead Time

VIEW PRODUCT Cart