Test Equipment, Systems & Solutions

• 

  Materials for EFT/Burst Laboratory Test Setup

  SKU: 11245

  Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)

  Standards Met: IEC 60601-1-2, IEC 61000-4-2

  Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity Testing

  Table Dimensions: .8 meters (H)

  Table Top Ground Plane: 1.6m x .8m

  Additional App Notes: EFT Waveform Verification, Troubleshooting EFT Failures

  IN STOCK

  View Product Cart

• 

  Com-Power EMC Testing Turntables TTW-400 and TTW-600

  SKU: TTW-400/600

  Table Heights: 9 Inches

  Load Ratings: 1000 lbs (455 kg)

  Power: 115 VAC, 60 Hz

  Remote Switches: Reversing drums

  Extension Cables: 9.8 feet (3 meters)

  Inquire for Availability

  View Product Cart

• 

  Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing

  SKU: 8250

  Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)

  Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV step

  Standards Met: IEC 61000-4-2, ISO 10605

  Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VA

  Contact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV step

  Polarity: positive/negative

  Pre-Programmed IEC Levels: Yes

  Resolution: 10 Volt steps up to 10 kV; 100 Volt steps to 30 kV

  Typically In Stock

  View Product Cart

• 

  Monthly Rental Teseq (Schaffner) CDN T002 Coupling Network for Unshielded Balanced Pairs

  SKU: sku-318

  Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD

  Current Rating: 1.5 Amps (3/5 Amp models available)

  Frequency Range: 150 kHz to 230 MHz (limited to 80 MHz on 3/5 Amp models)

  Mains & EUT Connections: Banana, XLR, RJ45, RJ11

  RF Connector: BNC, 50 Ω

  RF Input Voltage: 30 Volts Max

  Standards Met: IEC 61000-4-6

  Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s

  Cost New:

  Was:

  Price Now:

  $99.00

  Ordering Options

• 

  Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

  SKU: 11251

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 40Vrms

  BCI Test Levels (w/ built-in amplifier): 8Vrms

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  Typically In Stock

  View Product Cart

• 

  PMM 3010 EMC RF Signal Generator, 9 kHz to 1 GHz

  SKU: 30169

  Frequency Range: 9 kHz to 1 GHz

  Frequency Resolution: 1 kHz

  Frequency Accuracy: ± 10 ppm @ f > 10 MHz

  Level Range: -107 to +10 dBm

  Output Impedance: 50 Ω

  Connector: N-Type (f)

  Applications: Radiated Immunity

  Test Standards: IEC 61000-4-3

  Typically in Stock

  View Product Cart

• 

  Schwarzbeck NNBL 8226-2 Dual Path V-LISN NNBL

  SKU: 30014

  Frequency Range: (0.009) 0.15 - 30 (100) MHz

  Test Standards: MIL462D, MIL-STD-461E or MIL-461F, CISPR 16-1-2

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Max. Continuous Current: 70 A

  Max. Current (limited time): 100 A

  Max. Voltage (DC): 500 V

  Max. Voltage (AC 50/60 Hz): 250 V

  Inquire for Availability

  View Product Cart

• 

  Com-Power FCLCE-1000 Current Probe Calibration Fixture

  SKU: 11601

  Output resistance: 50 Ohms

  RF Connector: N-Type

  View Product Cart

• 

  EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

  SKU: 7851

  Standards: EN/IEC 61000-4-6

  Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

  Clamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHz

  Connector: N-type female

  Dimensions: 632 mm x 120 mm x 80 mm

  Frequency Range: 10 kHz to 1000 MHz

  Max. Cable Diameter: 20 mm

  Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

  Test Setup and Overview: RF Conducted Immunity Testing

  Cost New:

  Was:

  Price Now:

  $595.00

  Typically In Stock

  Ordering Options

• 

  Teseq NSG 3040 Transient Immunity Test System

  SKU: 4141

  Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT Voltage (w/ Built in CDN): 264 Volts

  Max EUT Current (w/ Built in CDN): 16 Amps

  EFT/Burst Pulse Output Capability: 4.8 kV

  Combination/Wave Surge Output Capability: 4.4 kV

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  Cost New:

  Was:

  Price Now:

  $1,495.00

  In Stock

  Ordering Options

• 

  Amplifier Research AT4520 High Power Horn Antenna

  SKU: 9140

  Frequency Range: 2.5 GHz to 7.5 GHz

  Input Power: 1400 Watts

  Gain (over isotropic): 9.5 dBi minimum, increases to 18 dBi at 7.5 GHz

  VSWR: 1.5:1 (max.), 1.3:1 (average)

  Beamwidth (average) at 3 dB down from peak: E & H Plane 30°

  Connector: 7/16 DIN

  Applications: Radiated Immunity

  Cost New:

  Was:

  Price Now:

  $400.00

  In Stock

  Ordering Options

• 

  Schwarzbeck HHS 5213-100 Helmholtz Coils

  SKU: 30144

  Number of Turns (per coil): 100

  Max. Coil Current: 15 A, 5 minutes

  Nominal Coil Current: 9 A, continuous

  Nominal Magnetic Field Strength: 900.9 A/m, continuous

  Applications: Radiated Immunity

  Test Standards: EN/IEC 61000-4-8

  Inquire for Lead Time

  View Product Cart