The EMC Shop has a large inventory of RF test equipment. Typically equipped with options suitable for compliance testing, many customers use the same equipment for general test uses.
Popular - Rohde & Schwarz RF Test Equipment
RF Test Equipment Categories
RF Test Equipment Test Equipment, Systems & Solutions
-
-
Rohde & Schwarz (R&S) NRP-Z55 Thermal Power Sensor
SKU: sku-714
RF Field Probe Connector: 2.92 mm connectorRF Field Probe Frequency Range: DC to 44 GHzRF Field Probe Maximum Input Power: 10 W (PK, 1 µs)RF Field Probe Measurement Accuracy: Measurement range: –35 dBm to +20 dBmSupply Voltage: Operation with R&S®NRP2 base unit or via USB on a Laptop/PC$295.00 -
Rohde & Schwarz (R&S) RTE1204 Digital Oscilloscope, 2 GHz, 4 channels, 5 Gsample/s, 10/40 Msample
SKU: 30048
Bandwidth: 2 GHzRealtime sampling rate: max. 5 Gsample/s on each channelTrigger types: edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, serial bus trigger (optional)Channels: 4$950.00Inquire for Availability -
Rohde & Schwarz NRP6A Average Power Sensor, 8 kHz - 6 GHz
SKU: 10679
Frequency Range: 8 kHz to 6 GHzRF Power Range: 100 pW to 200 mW (–70 dBm to +23 dBm)Max Average Power: 1 WattPeak Envelope Power: 2 Watts for 10 µs (then Kaploowee)Typically In Stock -
Tektronix DPO4054 Digital Oscilloscope, 4 Channels, 500 MHz
SKU: 30047
Bandwidth: 500 MHzChannels: 4Maximum Waveform Capture Rate: 3,700 wfms/sSample Rates: Up to 5 GS/s on All ChannelsInquire for Availability -
Teseq PMU 6003 USB Power Meter/Sensor 9 kHz - 3 GHz
SKU: sku-606
Current rating: 100 mA at 5 VFrequency Range: 9 kHz – 3 GHzRF Connector: N male 50 ΩStandards Met: IEC/EN 61000-4-3 IEC/EN 61000-4-6Supply Voltage: min. 4.7 V / max. 9 V -
AH Systems SAC-40G-1.5 RF Cable, Up to 40 GHz, 2.9mm Cable Connectors, 1.5 Meter Length
SKU: sku-569
RF Connector: 2.9mm -
Keysight N5183A Microwave Analog Signal Generator
SKU: KEY-N5183A
Frequency Range: 100 kHz - 20, 32 or 40 GHzOptions: Mechanical attenuator, fast switching speedIncludes: 2.92mm Adapter, Power Cord, CalibrationFrequency Resolution (0.01Hz): -107dBc/Hz at 20kHz offset from 3GHz carrierInterfaces: GPIB, LAN, USB and others$1,250.00 - $2,975.00Multiple Configurations In Stock -
Rohde & Schwarz SMA100A-B106L 9 kHz to 6 GHz Signal Generator w/ Opt B81
SKU: 7213
Frequency Range: 9 kHz to 6 GHzConnector: BNC FemaleSource Impedance: 50 Ω (nom.)Input Level Range: –6 dBm, ≤ 19 dBmInput Voltage: –10 V to +10 VOptions: B106L, B81Inquire for Availability -
PMM (Narda) 6630 USB RF Power Sensor 9 KHz - 3 GHz, 1 W
SKU: sku-470
Weight: 0.12 kgDimensions: 30 x 30 x 95 mmGeneral Data: Technical DetailsRF Field Probe Connector: N male, 50 ΩRF Field Probe Frequency Range: 9 kHz to 3 GHzRF Field Probe Max SWR: 10 kHz to 300 kHz 1,10 from +30 dBm to -9 dBm 300 kHz to 100 MHz 1,05 100 MHz to 1 GHz 1,10 1 GHz to 3 GHz 1,25 10 kHz to 3 GHz 1,20 from -9 dBm to -40 dBmRF Field Probe Maximum Input Power: 2 W peak envelope max 300 msRF Field Probe Measurement Accuracy: less than 0,35 dBRF Field Probe Power Linearity: -40 dBm to +30 dBm @ 50 MHz 0,2 dBRF Field Probe Power Measurement Range: 100 nW to 1 W (-40 dBm to +30 dBm)RF Field Probes: Power SensorSupply Voltage: 5 Volt DC – 100 mA (from USB Port) -
Rent IFI CDD1G Directional Coupler for EMC Applications 10 kHz - 1000 MHz, 100 W
SKU: sku-469
Weight: 1.0 lbCoupling: EMC ApplicationsCoupling factor: 40 dBFrequency Range: 10 kHz to 1 GHzGeneral Data: Technical DetailsImpedance: 50 ΩPower, nominal: 100 W -
AH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB
SKU: 10249
Weight: 1.1 lbs. / 0.5 kgApplication/Test Type: Improve overall system sensitivity for field measurements.Connector: N(f) to N(f)Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)Frequency Range: 20 MHz - 4 GHzGain: 26 dB typical (22 dB minimum)Input: 100/220 VAC regulated P/S output: 12 VDC 170 mAVSWR: 2.0:1 Input; 1.7:1 Output$550.00Typically In Stock