EMC Test Equipment

EMC Test Equipment Test Equipment

• 

  PMM (Narda) RA01 Active Rod Antenna, 9 kHz - 30 MHz

  SKU: 10044

  Weight: 1.5 kg (3.3 lbs)

  Antenna Factor (1 Meter): + 10 dB (+6dB for 1m monopole effective length normalization

  Antennas: Monopole Antennas

  Aperture: -

  Application/Test Type: Active, general-purpose, receive-only antenna for FCC, MIL-STD and TEMPEST tests

  VIEW PRODUCT Cart

• 

  PMM-9060 EMC/EMI Digital Receiver

  SKU: 10029

  VIEW PRODUCT Cart

• 

  Com-Power LI-400 10 kHz - 10 MHz LISN for Mil-STD 461

  SKU: sku-19

  Weight: 14 lbs. / 6.3 kg

  Application/Test Type: Power line conducted emissions tests

  Current Rating: 25 Amps (AC), 17 Amps (DC)

  Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm

  Frequency Range: 10 kHz to 10 MHz

  VIEW PRODUCT

• 

  EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

  SKU: 10693

  Test Capabilities: EFT Immunity

  Standards Met: IEC/EN 61000-4-4

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT AC Voltage (w/ Built in CDN): 250 Volts

  Max EUT AC Current (w/ Built in CDN): 32 Amps

  INQUIRE

  VIEW PRODUCT Cart

• 

  3ctest CWS 600CT Combination Wave & Telecom Surge Simulator, 1.2/50us 8/20us 10/700us 5/320us

  SKU: sku-333

  Polarity: Positive, Negative or Alternate

  Weight: Approx 15 kg (33 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Counter: 1-999

  Coupling: Optional for external SPN series CDN's

  VIEW PRODUCT Cart

• 

  Teseq ISN PLT-A Impedance Stabilization Network (ISN) for Power Line Telecommunication (PLT)

  SKU: sku-175

  Weight: approx. 1450 g

  Dimensions: (W x H x D) in mm: 185 x 100 x 100

  Frequency Range: 1.6 MHz to 30 MHz

  Impedance: 25 Ω ±3 Ω

  Isolation: 55 dB

  VIEW PRODUCT Cart

• 

  Teseq ISN PLT Impedance Stabilization Network (ISN) for Power Line Telecommunication (PLT)

  SKU: sku-176

  Weight: approx. 1450 g

  Dimensions: (W x H x D) in mm: 185 x 100 x 100

  Frequency Range: 1.6 MHz to 30 MHz

  Impedance: 25 Ω ±3 Ω

  Isolation: 55 dB

  VIEW PRODUCT Cart

• 

  Haefely PSURGE 10/700us Telecom Impulse Test System

  SKU: sku-248

  Polarity: Positive and Negative

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test Voltage: 0.20 – 7.4kV ±10%

  In Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck NSLK 8128 Line Impedance Stabilization Network

  SKU: 12230

  Frequency Ranges: 9 kHz - 30 MHz

  Max. Voltage: 250 V AC (50 Hz/ 60 Hz); 400 V DC

  Pre-Filter Choke: 250 µH

  Test Standards: CISPR 16-1-2

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  APREL Helmholtz Coil

  SKU: 30147

  Field Level: 100 x current through the coils

  Coil Radius: 142mm, 118 mm, 93 mm

  Wire: AWG24 enameled magnet wire

  Number of Turns (per coil): 20

  Applications: Radiated Immunity

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

  SKU: 10795

  Weight: Approx. 40 kg (88 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: IEC/external

  Dimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)

  Display Interface: 7“ touch-screen

  VIEW PRODUCT Cart

• 

  Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

  SKU: sku-219

  Application/Test Type: Automated Surge Immunity Testing

  Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)

  Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 480 VAC rms Line to Line

  Inquire for Availability

  VIEW PRODUCT Cart