CST1 ESD Current Target Calibration Kit DC - 4 GHz, 30 KV

CST1 ESD Current Target Calibration Kit DC - 4 GHz, 30 KV

Condition:
New
Frequency Response:
DC – 4 GHz S21 < ± 0.5 dB up to 1 GHz, < ± 1.2 dB up to 4 GHz
Input resistance:
1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm load
Max. IEC Pulse Amplitude:
Verified up to ± 30 kV
Voltage Non-linearity:
< 2% up to 20 kV, < 5% up to ± 30 kV
Standards:
MIL-STD 331
Manufacturer:
The EMC Shop
Online Orders Ship Same Day

 

Downloads

Datasheet (PDF File)

$475.00

 

SKU:
8539-RE
Availability:

In stock

Getting Started...

Overview

The EMC Shop is an ISO 17025 accredited calibration company with Model CST1 ESD Current Target Calibration Kits in stock available for sale or rental. Repair and refurbishment services available as well. Contact us now for application support.

Model CST1 ESD Current Target Calibration Kit is a wide-band ESD Target for ESD simulator calibration in accordance with the latest standards IEC 61000-4-2 and ISO 10605. The wide-band attenuator provides return loss while the cable is used as the connection to the oscilloscope. The frequency response specifications are taken with the complete assembly. CST1 ESD Current Target Calibration Kit is comparable to the following models: Haefely PET 4000, Teseq MD 103, Noiseken 06-00067A, and EM Test CTR2.

Videos

Key Considerations

Manufacturer:
The EMC Shop
Frequency Response:
DC – 4 GHz S21 < ± 0.5 dB up to 1 GHz, < ± 1.2 dB up to 4 GHz
Input resistance:
1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm load
Max. IEC Pulse Amplitude:
Verified up to ± 30 kV
Voltage Non-linearity:
< 2% up to 20 kV, < 5% up to ± 30 kV
Standards:
MIL-STD 331

Related EMC Equipment & Solutions

ECO2G Oscilloscope

ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun Verification

SKU: sku-2158

Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channel
Record Length: up to 500 Mpts
Waveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)
Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605
Vertical Scales: 0.5 mV/div to 10 V/div
Interfaces: USB Hosts, USB Device (USBTMC), LAN（VXI-11/Telnet/Socket, micro SD card, Pass/Fail, Trigger Out, HDMI
Protocol Capabilities: Serial bus triggering and decoder - I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, and Manchester
$395.00
IN STOCK
Ordering Options
EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2 - The EMC Shop

EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2

SKU: sku-645

Voltage Range: 500V - 16,500V +/-5%
Electrostatic Discharge: Pulse conforms to IEC 61000-4-2 edition 2
Holding Time: More than 5 seconds
Resolution: 100V steps
Rise Time: 0.8ns +/- 25%
Supply Voltage: More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAh
Trigger: Automatic + Manual
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form