Flicker & Harmonics Measurement Test Equipment, Systems & Solutions
-
York EMC HFG01 Harmonic and Flicker Generator
SKU: 6822
Test supply connector: 1.3 m captive lead with CEE 7/7 mains plug for connection to test equipmentPower Supply: External power supply, 24 V DC, 1A maximumIndicators: Thermal shutdownHarmonic current: Up to 40th harmonic: 50 Hz to 2 kHzFlicker disturbance: 1 Hz and 8.33 HzDimensions: 330 mm × 320 mm × 170 mmTest Standards: IEC 61000-3-2, IEC 61000-3-3$650.00IN STOCK -
3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12
SKU: 11918
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreApplications: Flicker and Harmonics TestingCurrent Handling: 32 Amps per phaseInquire for Availability -
PHFA Harmonics and Flicker Analyzer
SKU: 10451
Standards Met: IEC/ISO 60601-1-2, IEC 61000-3-2, IEC 61000-3-3, IEC/EN61000-4-7, IEC/EN61000-4-15EUT Power Handling: 1PH/16 AmpsMax Current (with LDPS Source): 16 Amps (5 Amps)Max Voltage (with LDPS Source): 690 Volts (630 Volts)IN STOCK -
EM Test DPA 500N Power Analyzer for Harmonics & Flicker
SKU: sku-242
Standards Met: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11Application/Test Type: Medical Device EMC TestingsTypically In Stock -
EM Test DPA 503N Flicker & Harmonics Analyzer
SKU: 11286
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreMax Current (per Channel): 32 AmpsApplications: Medical Device EMC TestingMatching Impedance Network: EM Test AIF 503N$975.00Usually ships in 24 hours. -
Teseq ProfLine 2105 Flicker and Harmonics Measuring System
SKU: 30177
Output Power (AC Mode): 5000 VAPower Source: 5kVA single phase 0-270V, 18.5ANumber of Channels: 4Fundamental: 0.05% +/- FS +/-0.05% / kHzHarmonics: 0.1%+/- 0.1% +/-/ kHzAccuracy: 3%Applications: Flicker and Harmonics MeasurementTest Standards: IEC 61000-3-2, IEC 61000-3-3Inquire for Lead Time -
Ranger Power Master PM3000HF 3-Phase Power Quality Analyzer with Flicker and Harmonics
SKU: 8845
Input Voltage: 0 - 480 VACChannels: 16Applications: Harmonics and FlickerTest Standards: IEC 61000-4-15, IEC 61326, IEC 61010Additional Test Standards: IEC 61000-3-2, IEC 61000-3-3Measurements: Voltage, current, power, power factor, VARs, phase angle, frequency, THD, and much moreNumber of configurations: 23 pre-programed factory configurationsHarmonics: Odds, Evens, Triplens, Individual Harmonics and Harmonic Direction to the 15th, K Factor, % Total Harmonic Distortion to the 25th, Harmonic ValueIn stock -
Teseq Profline 2100-1 Single-Phase Measurement System, AC source for Harmonics & Flicker
SKU: 11121
Test Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11Application/Test Type: Medical Device EMC TestingEUT Power: Single Phase AC up to 16 AmpsTypically In Stock -
EM Test AIF 503N32.1 3-Phase Flicker Impedance Network
SKU: sku-1917
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and moreApplication/Test Type: Medical Device EMC TestingBuilt-in Power Analyzer: EM Test DPA 503NCurrent Handling: 32 Amps per phaseRENTAL ONLY -
EM Test Netwave 3.1 Programmable AC/DC Power Source
SKU: sku-748
Frequency Range: DC - 5,000 HzTest Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreApplications: Flicker and Harmonics TestingInquire for Availability -
Teseq ProfLine 2145-208 Harmonics & Flicker Measuring System
SKU: 11156
Phase synchronization: 3Voltage Rating: 45 kvDual Range VAC: 150 V and 300 VDual Range VDC: 200 V and 400 VWeight: 522 kgFrequency Range: 16 Hz – 819 HzInquire for Availability -
EM Test ACS 503N30 AC Voltage Source for Harmonics & Flicker
SKU: sku-312
Applications: Flicker and Harmonics TestingTest Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreInquire for Availability