PMM EMC Products Test Equipment, Systems & Solutions
-
Narda PMM COND-IS/10 RF Conductive Immunity Test System
SKU: 11334
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 10VrmsBCI Test Levels (w/ built-in amplifier): 3VFrequency Range (w/ built-in amplifier): 150 kHz - 230 MHzTypically In Stock -
PMM 8053A Field Meter Kit with EP-330 Electric Field Probe
SKU: 3247
Frequency Range: 100 kHz - 3 GHzDynamic Range: > 60 dBFlatness (10 to 300 MHz): ± 0.5 dBFlatness (3 MHz to 3 GHz): ± 1.5 dBIsotropicity: ± 0.8 dB (Typical ± 0.5 dB)Applications: Radiated Emissions$259.00In Stock -
Inquire for Availability -
PMM (Narda) DR-01 Double Ridge Horn Antenna, 6 to 18 GHz
SKU: 10048
Weight: 250 grams (0.5 Lbs)3dB Beamwidth (E-Field): 33°3dB Beamwidth (H-Field): 38°Antenna Factor (1 Meter): 36 - 41 dB/mAntennas: Double Ridge Guide Horn AntennaApplication/Test Type: High Frequency, High Power Radiated EMCConnector: N-Type (male)Dimensions: 55 x 44 x 137 mmFrequency Range: 6 GHz to 18 GHzGain: 9 - 16 dBiImpedance: 50 nominalMaximum Continuous Power: 150 WattsVSWR: Under 2:1 (1.8:1 typ.)Inquire for Availability -
PMM (Narda) AS-02 Antenna Set, 30 MHz - 3 GHz, 75 Watts
SKU: 6598
Antenna Factor (1 Meter): -15 +2 dB typical (30 MHz - 200 MHz); 6 dB typical (200 MHz - 3 GHz)Antennas: Kits & SetsApplication/Test Type: Radiated EMCConnector: N-Type(female)Dimensions: 65 x 65 x 137 cm (BC-01); 70 x 10 x 86 cm(LP-02)Frequency Range: 30 MHz - 200 MHz/200 MHz - 3 GHzGain: 8 - 36 dB typicalImpedance: 50 Ω nominalMaximum Continuous Power: 100 Watts up to 1 GHz (50 watts up to 3 GHz)Inquire for Lead Time -
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15
SKU: 10057
Weight: 50 kg (110 pounds)Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.Current Rating: 63 Amps MaxDimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)Frequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeMains & EUT Connections: 63 A IEC connectorRF Connector: BNC (f)Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461FVoltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)CISPR 16-1-2: YesDO-160F: YesCISPR 22: YesFCC: YesANSI C63.4: Yes -
PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC
SKU: 8784
Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 HzCurrent Rating: 32 Amps with IEC plug; 16 Amps with Schuko plugFrequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeMains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connectorRF Connector: BNC (f)Standards Met: VDE 0876, CISPR 16-1-2, FCC Part 15Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)Additional Standards Met: DO-160F, CISPR 22, ANSI C63.4In Stock -
PMM (Narda) RA01 Active Rod Antenna, 9 kHz - 30 MHz
SKU: 10044
Weight: 1.5 kg (3.3 lbs)Antenna Factor (1 Meter): + 10 dB (+6dB for 1m monopole effective length normalizationAntennas: Monopole AntennasAperture: -Application/Test Type: Active, general-purpose, receive-only antenna for FCC, MIL-STD and TEMPEST testsConnector: BNCDimensions: Rod: 1 meter by 16 mm diameter; Ground plane: 600 mm x 600 mm; Electronics: 150 mm x 135 mm x 120 mmFrequency Range: 9 kHz to 30 MHz (RA01); 150 kHz to 30 MHz (RA01HV) frequency rangeImpedance: 50 OhmsMounting Base: 1/4" c 20 screw -
