Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.IEC/EN Standards Categories
IEC/EN Standards
-
Rent ETS-Lindgren 5402 GTEM Test Cell for Small DUT
SKU: 10839
Features: Ships fully assembled, easy unpack and setupApplications: Radiated Emissions, RF/Radiated Susceptibility TestingMax DUT Size: 8" x 8" x 6"Test Standards: FCC Part 15, IEC 61000-4-3$17,500.00In Stock -
3ctest RWS 600 Ring Wave Generator for IEC 61000-4-12
SKU: 10595
Display Interface: 5.7 inch TFT touch screenPhase synchronization: 0°-360°, 1° step or randomPolarity: Positive. negative, alternatingPulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30ΩPulse voltage (open circuit): 0.25 kV–6.0kV ± 10%4-6 Weeks -
PHFA Harmonics and Flicker Analyzer
SKU: 10451
Standards Met: IEC/ISO 60601-1-2, IEC 61000-3-2, IEC 61000-3-3, IEC/EN61000-4-7, IEC/EN61000-4-15EUT Power Handling: 1PH/16 AmpsMax Current (with LDPS Source): 16 Amps (5 Amps)Max Voltage (with LDPS Source): 690 Volts (630 Volts)IN STOCK -
Haefely PEFT 4010 Electrical Fast Transient EFT/Burst Generator
SKU: 10246
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Coupling: Built-in Single Phase 250 Volts AC / 110 Volts DC and 16 AmpsPulse amplitude: 0.10 - 4.5 kVApplications: Electrical Fast Transient ImmunityTest duration: Impulses per burst 1000 max Impulses per second 12000 max$895.00Typically In Stock -
SS1G9k RF Conducted Susceptibility Power Amplifier
SKU: 172501
Frequency Range: 9 kHz - 1 GHzOutput Power (P1dB): 5 Watts to 1,000 WattsHarmonics: 20 dBc typRF Connectors: N (f) - Front or RearInquire for Availability -
Haefely FP-SURGE 100M 100 Amp Surge Immunity System
SKU: 8061
Test Capabilities: Combination Wave Surge ImmunityStandards Met: IEC/EN 61000-4-5 ANSI standards C62.41 and C62.45Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage: 690 VoltsMax EUT Current: 100 AmpsRENTAL ONLY -
AE Techron DSR 100 Ripple Generator and AC/DC Voltage Source
SKU: 11769
Test Standards: ISO 7637-4, ISO 21498Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesFrequency Range: DC - 300 kHzOutput Current: up to 400 AmpsTypically In Stock -
SS6G-200A 1 - 6 GHz, 200 Watt Solid State RF Amplifier
SKU: 6284
Frequency Range: 700 MHz - 6 GHzGain: 55 dB minimumInput: 180 - 240 VAC, 2500 wattsOutput: POWER OUTPUT @ 1dB COMPRESSION : Typical: 200 watts minimum, 225 watts typicalImpedance: 50 ohmsIn STOCK -
Narda PMM COND-IS/10 RF Conductive Immunity Test System
SKU: 11334
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 10VrmsBCI Test Levels (w/ built-in amplifier): 3V$16,500.00Typically In Stock -
Thermo-Keytek MZ15/EC Minizap ESD Simulator
SKU: 10322
Voltage Range (Contact Mode): ±0.5 to 8 kV±0.5 to 15 kV (Air Discharge): ±0.5 to 15 kVEMC Standards: IEC 61000-4-2R/C Network: 150 pF/330 ohm standardDischarge Frequency Range: Single shot as well as 1/sec and 20/sec repetitive operation$495.00In Stock -
Amplifier Research KAA2030
SKU: 427211
Output Power: 200 WattsFrequency Range: 500 KHz - 40 MHzMax. Gain: 52 dB minimumInput for Rated Output: 2.0 milliwatt maximum1 Available -
EM Test NetWave 7.3 Programmable AC & DC Power Supply
SKU: 30176
Bandwidth: DC - 5 kHzOutput Voltage: 0 V - 360 VAC (RMS), 0 V - +/-500 VDCOutput Current: 26 A (RMS) continuous, 47 A (RMS) short-term (max. 3 s), 200 A repetitive peak (@max. 300 VAC, 360 VDC)Number of Lines: 1Frequency Accuracy: 100 ppmInquire for Lead Time