Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.IEC/EN Standards Categories
IEC/EN Standards Test Equipment
-
RFCI-IEC-25 Conducted Disturbance Test Generator
SKU: 8021
Frequency Range: 100 kHz - 250 MHzPower: 25 WMeasuring range: +30 dBm to – 40 dBmOutput Connector (Amplifier Monitor): BNC, 50 Ω / -40 dB (amplifier output), ±3 dB$1,195.00 - $12,450.00In Stock -
EMC Partner MIG0603IN1 S-R Surge and Ringwave Impulse Generator
SKU: 4582
Standards Met: IEC/EN 61000-4-5, IEC/EN 61000-4-12Applications: EMC Surge, Precompliance EMC TestingMax EUT AC Voltage (W/ Built In CDN): 280 VoltsMax EUT AC Current (W/ Built In CDN): 16 AmpsCombination/Wave Surge Output Capability: 6 kV$17,950.00Inquire for Availability -
ETS-Lindgren 3184 Harmonics Measurement Antenna per IEC 61000-4-3
SKU: 3184
Frequency Range: 1 GHz to 18 GHzConnectors: SMA (F)Pattern Type: OmnidirectionalPolarization: Linear$5,500.00In Stock -
LDPS AC Power Source, 1 kW up 4.4 Amps
SKU: 8549
Current ranges: ±24mA to ±400A pk in fifteen rangesSampling rate: 300 samples per secondStandards Met: IEC/ISO 60601-1-2, IEC 61000-3-2, IEC 61000-3-3Additional Standards Met: IEC 61000-4-7 , IEC/EN61000-4-15Voltages Ranges: 115V (±200V pk), 230V (±400V pk)IN STOCK -
Teseq CIP 9136A Bulk Current Injection Test Clamp
SKU: 8766
Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outsideConnector: N-Type up to 1,000 WattsDimensions: 61 mm wide (2.4 inches)Frequency Range: 4 kHz - 400 MHzImpedance: 100 Ω typical at resonance$440.00Typically in Stock -
3ctest EFT 500S Burst/EFT Simulator up to 4.8 kV w/ Single Phase CDN
SKU: 11521
Standards Met: IEC/EN 61000-4-4, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2Applications: EFT Immunity, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 264VoltsMax EUT AC Current (w/ Built in CDN): 16 AmpsMax EUT DC Voltage (w/ Built in CDN): 125 Volts6-8 Weeks -
EM Test DPA 500N Power Analyzer for Harmonics & Flicker
SKU: sku-242
Standards Met: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11Application/Test Type: Medical Device EMC TestingsTypically In Stock -
Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances
SKU: 6861
Frequency Range: 30 MHz to 1000 MHzMin. Site Attenuation: 13 dB to 22 dBClamp Factor: -4 dB to +5 dBDecoupling factor DF: >21 dBDecoupling factor DR: >30 dB$4,965.00In Stock -
Narda PMM EP-600 Isotropic E-Field Probe 100 kHz-9.25 GHz
SKU: 6347
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.14 to 140 V/m (0.01 V/m)Frequency Range: 100 kHz to 9.25 GHzStandards Met: IEC/EN 61000-4-3Interfaces: Fiber-OpticTypically In Stock -
Teseq NSG 437 ESD Simulator for IEC 61000-4-2 and ISO 10605
SKU: 10117
Test Standards: ISO 10605, IEC 61000-4-2,ESD Voltage Output Range (Air/Contact): 30kVInterchangeable R/C Modules: YesBattery Life: NoneApplications: EV and Automotive$490.00 - $1,090.00IN STOCK -
Chroma 61609 Programmable AC Power Supply
SKU: 30162
Applications: Military and AerospacePhase: 1 or 3 phaseMaximum Power: 6 kVARMS: 60A/30ATest Standards: EN/IEC 61000-4-13, EN/IEC 61000-4-28Inquire for Lead Time -
Chroma 61509 Programmable AC & DC Power Supply
SKU: 30161
Applications: Military and AerospaceFrequency Range: DC, 15 Hz - 2 kHzVoltage Ranges: 0-175 V & 0-350 VPhase: 1 or 3 phaseMaximum Power: 6kVAInquire for Lead Time