Chamber & Lab Categories
Chamber & Lab
-
EMC Pioneer PESF-J121C-F0-800 Single Power Line Filter
SKU: 30003
Rated Voltage: 1500 VDCOperating Frequency: DCRated Current: 800 ATest Voltage: 2500 VDC (line to case)Shielding Effectiveness: 100 dB @ 14 KHz ~ 40 GHzInquire for Availability -
FTA1G Ferrite Tile Absorber 30 MHz - 1 GHz
SKU: 4023
Frequency Range: 30 MHz - 1 GHzApplications: EMC Test ChambersThickness: 5.5mm typical (6.2mm available)Dimensions (per tile): 3.93” by 3.93” (100mm by 100mm)Typically In Stock -
ETS Lindgren EQ-2001-NR EMI/RFI Filter
SKU: 30045
Number of Lines: 2Rated Voltage: 0 to 30 VAC / 50 VDCRated Current: 0 to 1 AOperating Range: 0 to 60 HzInsertion Loss: 100 dB minimumInquire for Availability -
-
Inquire for Lead Time -
ETS-Lindgren HI-3604 ELF Survey Meter
SKU: 30096
Frequency Range: 30 to 2000 HzSensitivity, Electric Field: 1 V/m to 200 kV/mSensitivity, Magnetic Field: 0.2 mG to 20 G$395.00IN STOCK -
Rohde & Schwarz OSP130 RF Switch
SKU: 438
Rated Frequency: 50 Hz to 60 Hz (± 10 %)Rated Voltage: 100 V to 240 V AC (± 10 %)Dimensions: 465.3 mm × 108.7 mm × 494.8 mmConnectors: USB type A; LAN: Ethernet RJ-45 connector (f), 10/100 Mbit/s; CAN: 9-pin D-Sub connector (m), 512 kbit/s$1,950.00In Stock -
Materials for EFT/Burst Laboratory Test Setup
SKU: 11245
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity TestingTable Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8mIN STOCK -
-
HCP-Auto Copper ESD Field Coupling Device
SKU: 5873
Dimensions of Field Coupling Plane: 170 mm × 360 mmMaterial: Copper, 1 mm thickDimensions of Field Coupling Strip: 40 mm wideDischarge Island: φ 80 mmNon-Conductive Module: εr <2.5, 50 mm heightIn Stock -
Langer EMV-Technik A100-1 Set 25 kHz Optical Fibre Probe 1-Channel
SKU: 30041
Bandwidth: DC to 25 kHzSampling Rate: 125 kbpsResolution: 12 bitApplications: Conducted ImmunityTest Standards: IEC 61000-4-2, IEC 61000-4-3Inquire for Availability -
GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding
SKU: 30180
Total Resistance: 1 MOhm (± 1%)Connector Type: 1/4" SpadeCable Voltae Withstand: 40kV (150 degrees C)Length: 1.5, 2 and 3 MetersResistance: HV Precision Resistors (1% tolerance)$279.00In Stock