Transient Generator Verification Equipment

Generator Verification

CST2-30 ESD Current Target Calibration Kit

SKU: 8757

Frequency Range: DC - 4 GHz

Input Resistance: ≤ 2.00 Ω (± 1%)

Max. IEC Pulse Amplitude: Verified up to ±30 kV

Applications: Electrostatic Discharge Immunity Test

Test Standards: IEC 61000-4-2, ISO 10605, and many more

Cost New:

Was:

Price Now:

$495.00 - $3,975.00

In Stock

ORDERING OPTIONS
ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun Verification

SKU: 5501

Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channel

Record Length: up to 500 Mpts

Waveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)

Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605

Vertical Scales: 0.5 mV/div to 10 V/div

IN STOCK

VIEW PRODUCT Cart
DP7 High Voltage Probe for Surge Generator Waveform Verification

SKU: 6533

Bandwidth: DC - 70 MHz

Attenuation: 1:100 and 1:1000

Accuracy: ±2%

Input Voltage Range: < +700V for X100, < +7000V for X1000

Output Voltage: ≤ + 7000V

Cost New:

Was:

Price Now:

$145.00 - $1,850.00

IN STOCK

ORDERING OPTIONS
Pearson 101 Current Monitor for Surge Generator Output Verification

SKU: 11067

Weight: 23 ounces

Aperture: See data sheet

Connector type: BNC (UG-290A/U)

Current time product: 2.5 Ampere-second maximum

Dimensions: See data sheet

IN STOCK

VIEW PRODUCT
EFT-DLC-CAL Transducer Plate for Coupling Clamp Calibration

SKU: 12781

Connector Types: Fischer HV, SHV, BNC

Application: EFT Waveform Verification, IEC / EN 61000-4-4 Edition 3

Standards Met: Calibration according to IEC / EN 61000-4-4 Edition 3

Compatible Couplers: Any

Cost New:

Was:

Price Now:

$1,475.00

IN STOCK
CST1 ESD Current Target Calibration Kit DC - 4 GHz, 30 kV

SKU: 8539

Frequency Response: DC – 4 GHz S21 < ± 0.5 dB up to 1 GHz, < ± 1.2 dB up to 4 GHz

Input resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm load

Max. IEC Pulse Amplitude: Verified up to ± 30 kV

Voltage Non-linearity: < 2% up to 20 kV, < 5% up to ± 30 kV

Standards: IEC 61000-4-2, ISO 10605, and many more

Cost New:

Was:

Price Now:

$475.00 - $5,940.00

In stock

ORDERING OPTIONS
CWG 550 Impedance matching network for IEC 61000-4-5

SKU: 7279

Test Standard: IEC/EN 61000-4-5

Impedance: 18 µF

Max Surge Voltage: 4400 V

Max AC Voltage: 250 V AC

In Stock

VIEW PRODUCT Cart
EMC Partner VERI-DIPS Inrush Current Verification & Calibration Kit

Applications: Transient Waveform Verification

Test Standards: IEC 61000-4-11, IEC 61000-4-29, IEC 61000-4-34

Current Range: 1 - 1000 Amps

Output Connector: BNC

Application Time (Max): 30 seconds

RENTAL ONLY

VIEW PRODUCT Cart
ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

SKU: 35542

Air Discharge Voltage: ± 1V ~ 100 kV ( ± 1% ± 2 counts )

Voltage Resolution: 1 Volt up to 20 kV, 10 Volts Over 20 kV

Display: 4 ½ large LCD / LED

Standards Met: ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...

Input/Shunt Resistance: 100 GOhm

Cost New:

Was:

Price Now:

$295.00 - $4,200.00

Ships within 24 hours.

ORDERING OPTIONS
Teseq INA 5530 ISO 7637 Automotive Pulse 3a & 3b Verification Kit

SKU: sku-634

Impedance: 50 Ohms

RF Connector: Input BNC male Output BNC female

Voltage Rating: 1.2 kV, 3Wrms

VIEW PRODUCT Cart
Rent Teseq CAS 3025 Burst/EFT Pulse Verification Kit

SKU: sku-60

VIEW PRODUCT Cart
Teseq MD 103 1 Ohm Current ESD Pulse Target

SKU: 10035

Resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm load

Frequency Range: DC - 4 GHz

Grounding Plane & Cal Setup: Avaialble at ESDGuns.com

Cost New:

Was:

Price Now:

$450.00 - $2,950.00

Typically In Stock

ORDERING OPTIONS