Categories
Test Equipment, Systems & Solutions
-
EM Test TSS 500N4B Telecom Surge Generator
SKU: 9122
Applications: Telecom Testing, Conducted ImmunityTest Standards: Bellcore/Telcordia GR-1089-CoreWaveform: 10/250usOutput Voltage: 100 Volts to 4,000 VoltsOutput Current: 50 Amps to 2,000 Amps$1,950.00 - $37,500.00In Stock -
ETS-Lindgren AMS-8050 Antenna Measurement System
SKU: 30156
Frequency Range: 700 MHz to 10 GHzVoltage: 50/60 HzConnector: IEC 320Multi-Axis Positioner: Accuracy 0.5 degrees, Resolution 0.1 degreesPath Length: 1.5 mDrive System Electrical (VAC): 208/240 VAC; NEMA 6-15Drive System (Amps): 10 AEquipment/DUT Electrical (VAC): 115/230 VAC; NEMA 5-15Equipment/DUT (Amps): 5 AShield Performance: >90 dBApplications: OTA Testing, EMC Precompliance TestingInquire for Lead Time -
Fischer FCC-LISN-50-200-1 Line Impedance Stabilization Network
SKU: 8963
Frequency Range: 10 kHz - 30 MHzInductance: 50 µHMax. Current: 200 AmpsMax. Voltage: 480 Vrms, DC/60 HzMax. Voltage: 130 Vrms, 400 HzApplications: Conducted Emissions, Military EMC TestingTest Standards: MIL-STD-461$500.00 - $795.002 Units Available -
Narda EFD-0691 E-Field Probe 100 kHz to 6 GHz
SKU: 8643
Frequency Range: 100 kHz to 6 GHzProbe Type: Electric E-FieldMeasurement Range: 0.2 to 650 V/m (CW), 0.2 to 17 V/m (True RMS)Dynamic Range: 70 dBDirectivity: Isotropic (Tri-axial)Applications: Radiated Emissions TestingStandards: EN 50492 and IEC 62232In Stock -
Anritsu S810D SiteMaster Cable and Antenna Analyzer
SKU: 8865
Frequency Range: 0.025 GHz to 10.5 GHzOutput Power: <0 dBm (at any frequency)Measurement Accuracy: ≥42 dB corrected directivity after calibration for <5 GHz, ≥36 dB corrected directivity after calibration for <15 GHz, ≥32 dB corrected directivity after calibration for >15 GHzApplications: VSWR, return loss, cable loss, and distance-to-fault (DTF) analysis$390.00 - $975.00In Stock -
Schwarzbeck CDN M4PE 32A Coupling Decoupling Network
SKU: 6657
Frequency Range: 150 kHz to 230 MHzCommon Mode Impedance: 150 kHz – 24 MHz: 150 Ω ±20 Ω, 24 MHz–80 MHz: 150 Ω +60 Ω/-45 Ω, 80 MHz–230 MHz: 150 Ω ±60 ΩMax. RF Test Voltage: 30 VRF Input Power: 6 WInput voltage EuT (AE): Line to ground / line to line: 500 VAC / 1000 VDC, 1000 VAC / 2000 VDCEUT, AE Connectors: 4 mm safety banana (f)Applications: RF Conducted Immunity TestingTest Standards: IEC 61000-4-6$295.00 - $3,095.00Typically In Stock -
Schwarzbeck CMDM 8700 B Common Mode / Differential Mode Switch
SKU: 8564
Frequency Range: 9 kHz – 108 MHzConnector: BNCImpedance of Line A, Line B and output port: 50 ΩVoltage division factor at the measuring port: -20 dB +/-3 dBApplications: Radiated Emissions$2,775.00Typically in Stock -
Elektro-Automatik EA-PSE 9500-60 3U Programmable DC Power Supply
SKU: 8870
Max. Voltage Handling: 500 VMax. Current Handling: 10 kWPower: 10,000 WApplications: Conducted ImmunityStandards: IEC 61326, IEC 1010, EN 61010$345.00 - $975.00In Stock -
VCP-FS Vertical Coupling Plane with Voltage Bleeding Cable
SKU: 4378
Standards Met: IEC 61000-4-2Applications: Conducted Immunity, Electrostatic Discharge Immunity TestVCP Aluminum Size: 50 x 50 cm / 19.7 x 19.7 inVoltage Bleeding Cable: Includes two 470kΩ resistorsHeight: 1.5m/4.9 ft or 2.25m/7.3 ftIn Stock -
3ctest EDS 10IC HBM/MM Electrostatic Discharge Simulator
SKU: 6980
Output Voltage: HBM 5~8000V 5%+5V; MM 5~1000V 5%+5VPolarity: Positive, Negative, AlternateTime Interval: 0.1 - 10s adjustableTrigger Mode: Automatic, single or external triggerPower Supply: AC100 ～ 240V +/-10% 50/60HzApplications: Conducted ImmunityStandards: IEC 61000-4-2, IEC 61000-6-1, IEC 61000-6-2IN STOCK -
INA 4561 100pF/1500Ohm Discharge Network for Teseq NSG 438
SKU: 10022-4
Standards Met: MIL-STD 883Resistance/Capacitance: 100pF/1500OhmTypically In Stock -
Teseq INA 4553 ISO 10605 Discharge Network
SKU: 10022-2
Standards Met: ISO 10605Resistance/Capacitance: 330pF/330OhmTypically In Stock