Test Equipment, Systems & Solutions

• 

  Com-Power CLA-150 32mm Absorbing Clamp CISPR 14

  SKU: 1551

  Test: CISPR 14

  Application/Test Type: Conducted Emissions, Radiated Emissions

  Clamp factor (CF): -3 dB to +4 dB

  Dimensions: 627 x 114 x 165 mm (24.7 x .4.5 x 6.5 inches)

  Frequency Range: 30 MHz to 1000 MHz

  Isolated lines under test: Power supply lines and other connecting lines

  Max. Cable Diameter: 32 mm (1.26 inches)

  Min. site attenuation: 14 dB to 21 dB

  RF Connector: BNC (f), 50 Ohms

  Inquire for Availability

  View Product View Product

• 

  PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

  SKU: 10264

  Weight: 50 kg (110 pounds)

  Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.

  Current Rating: 63 Amps Max (IEC60309); 60 Amps Max (UL1682, UL1686)

  Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

  Mains & EUT Connections: 4P5W connector

  RF Connector: BNC (f)

  Standards Met: IEC 60309; UL1682; UL1686; CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

  Voltage Rating: 400 VAC, 565 VDC (L-PE, N-PE) 690 VAC, 975 VDC (L-L, L-N)

  View Product Cart

• 

  Keysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz

  SKU: 10259

  Frequency Range: 20 Hz - 26.5 GHz

  Resolution: 2 Hz

  Bandwidth accuracy (–3.01 dB): 1 Hz to 1.3 MHz ± 2 % (nominal)

  Dynamic Range: > 70 dB

  Amplitude Accuracy: < ± 2.7 dB

  EMC Standards: CISPR 11, CISPR 22, ANSI C63.2

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  Typically In Stock

  View Product Cart

• 

  Keysight (Agilent/HP) 11947A 9 kHz - 200 MHz Transient Limiter w/ High Pass Filter

  SKU: 4602

  Applications: Conducted Emissions, Precompliance EMC Testing

  Frequency Range: 9 kHz to 200 MHz

  Insertion Loss: 10 dB

  Max. Input Level: Continuous: 2.5 W (+34 dBm), Pulse: 10 kW for 10 µS, DC:±12 V

  Typically in Stock

  View Product View Product

• 

  EM Test CWS 500N4 Common-Mode Disturbance Simulator for IEC 61000-4-16 & IEC 61000-4-19

  SKU: sku-254

  Weight: Approx. 30kg

  Dimensions: 555mm x 448mm x 286mm

  Frequency Range: 10Hz to 165kHz

  Max input power: 600 Watts

  Output: For output characteristics reference data sheet

  Supply Voltage: 115V - 230V +10/-15%, 50/60Hz

  View Product Cart

• 

  EM Test CWS 500N2.2 BCI Test System

  SKU: sku-252

  Test Capabilities: RF Conducted Immunity

  Standards Met: MIL STD 461 CS 114, DO-160 CS Test

  Applications: Vehicle, Military and Aerospace, BCI Testing

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 400 MHz

  Typically In Stock

  View Product Cart

• 

  AH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB

  SKU: 10249

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Improve overall system sensitivity for field measurements.

  Connector: N(f) to N(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 20 MHz - 4 GHz

  Gain: 26 dB typical (22 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  VSWR: 2.0:1 Input; 1.7:1 Output

  Cost New:

  Was:

  Price Now:

  $550.00

  Typically In Stock

• 

  PMM (Narda) LP-03 Log Periodic Antenna, 800 MHz - 6 GHz

  SKU: 10238

  Weight: 0.25 kgs (0.6 LB's)

  Antenna Factor (1 Meter): 23 / 42 dB typical

  Antennas: Log Periodic Antennas

  Application/Test Type: Radiated emissions and immunity

  Connector: Type-N(m) or Type-N(f)

  Dimensions: 18.7 cm x 32.5 cm x 8.1 cm

  Frequency Range: 800 MHz to 6 GHz

  Gain: 3.5 to 6.5 dBi typical

  Impedance: 50 Ω nominal

  Maximum Continuous Power: 75 Watts

  Mounting Base: Tripod adapter, supplied

  Standards Met: IEC 61000-4-6, MIL-STD-461F, DO-160

  VSWR: Less than 1.7:1 typical

  View Product Cart

• 

  AH Systems SAC-210 RF Cable Up to 5 GHz, BNC(m) to BNC(m)

  SKU: sku-234

  RF Connector: BNC(m) to BNC(m), RG-58

  View Product View Product

• 

  EM Test (Lüthi) CDN T-Type Coupling/Decoupling Network for Unshielded Lines

  SKU: sku-232

  Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD

  Current Rating: 1.5 Amps (3/5 Amp models available)

  Frequency Range: 150 kHz to 230 MHz (limited to 80 MHz on 3/5 Amp models)

  Mains & EUT Connections: Banana, XLR, RJ45, RJ11

  RF Connector: BNC, 50 Ω

  RF Input Voltage: 30 Volts Max

  Standards Met: IEC 61000-4-6

  Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s

  View Product View Product

• 

  EM Test (Lüthi) AF-Type Coupling/Decoupling Network for Unscreened/Unsymmetrical Lines

  SKU: sku-231

  Application/Test Type: Immunity test to conducted disturbances, induced by radio-frequency fields according to the standards

  Current Rating: 1.5 Amps (Optional 3 Amps)

  Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz

  Mains & EUT Connections: 4 mm banana or D-Sub 15/25 pins

  RF Connector: BNC 50 Ω

  RF Input Voltage: 30 Volts Max

  Standards Met: IEC 61000-4-6, CISPR 15, IEC/EN 60945, EN 55015

  Voltage Rating: AC max. voltage (line to ground): 63V - 250V; DC max. voltage (line to ground): 100V - 250V;

  View Product View Product

• 

  Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

  SKU: sku-230

  Weight: 1.5 kg (3.3 lbs)

  Application/Test Type: Coupling / decoupling network (CDN) used for all unscreened, unbalanced lines, carrying low current

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 2300 MHz: 150 Ω +60 Ω / -45 Ω; 230 MHz to 300 MHz 1): 150 Ω +60 Ω / -60 Ω

  Current Rating: 200 mA to 4 Amps (refer to data sheet for exact model specifications)

  Decoupling of Common Mode Disturbance: 10 kHz: Over 10 dB:150 kHz: Over 35 dB: 26 MHz: Over 45 dB: 80 MHz: Over 25 dB;150 kHz: Over 30 dB: 1.5 MHz: Over 60 dB: 30 MHz: Over 50 dB: 230 MHz: Under 30 dB (refer to data sheet for some exceptions)

  Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

  Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz

  Mains & EUT Connections: 4 mm banana or D-Sub 25 pins

  RF Connector: BNC 50 Ω

  RF Input Voltage: 30 Volts Max

  Standards Met: IEC 61000-4-6, CISPR 15

  Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB, 10 dB ±1 dB for CDN A501, A701, A801; 80 MHz to 300 MHz 1): 9.5 dB +3 dB / -2 dB 10 dB +3 dB / -2 dB for CDN A501, A701, A801; All other models 10 dB ±1 dB

  Voltage Rating: AC max. voltage (line to ground): 63V - 160V; DC max. voltage (line to ground): 100V - 250V; Test voltage: 250 V - 400 V DC, 2 sec (refer to data sheet for exact model specifications)

  View Product View Product