Test Equipment, Systems & Solutions

• 

  3ctest EFT 500T Burst/EFT Simulator w/ Three Phase CDN

  SKU: 4559

  Applications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking

  Standards Met: IEC 61000-4-4,IEC 61326,EN 61000-6-1,IEC 61850-3,EN 61000-6-2

  Built-in three phase CDN: AC 380V/16A; DC-1 220V/16A

  Output Voltage Range: 0.25 to 4.8kV

  Condition of Used (Scale 5 - 10): 8

  Pre Programmed Test Routines: Yes

  Cost New:

  Was:

  Price Now:

  $1,395.00

  In Stock

  Ordering Options

• 

  Com-Power ISN Calibration Kit for ISN and LCL Adapters

  SKU: sku-580

  View Product Cart

• 

  AH Systems SAS-545 1 GHz Biconical Antenna

  SKU: sku-573

  Weight: 1.6 lb.'s (725 g)

  Antennas: Biconical Antennas

  Application/Test Type: Radiated emissions and immunity

  Connector: N-type (female)

  Dimensions: Height: 15 in. (38.1 cm) Width: 14 1/4 in. (36.25 cm) Depth: 7 11/16 in. (19.5 cm)

  Frequency Range: 30 MHz - 1GHz

  Gain: -50 to 2.5 dBi

  Impedance: 50 Ohms nominal

  Maximum Continuous Power: 200 Watt

  Mounting Base: ABC-B Mounting Clamp with ¼ - 20 Thread, female

  View Product View Product

• 

  Haefely MSURGE-A Pulse Magnetic Field for AXOS 5 & AXOS 8, IEC 61000-4-9

  SKU: sku-571

  Weight: 25 kg

  # of turns: 1, 5, 37

  Dimensions: Coil Size: 1 x 1 m, Homogeneous field volume: 60 x 60 x 50 cm

  Mounting Base: Rigid aluminum frame with casters

  View Product Cart

• 

  AH Systems SAC-40G-1.5 RF Cable, Up to 40 GHz, 2.9mm Cable Connectors, 1.5 Meter Length

  SKU: sku-569

  RF Connector: 2.9mm

  View Product View Product

• 

  Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

  SKU: 30080

  Weight: approx. 7 kg

  Application/Test Type: Disturbance power measurements of coaxial cables, automotive screened components (eg motor ignition systems and sheath current on aerial cables.

  Clamp factor (CF): -4 dB to +5 dB

  Current Rating: 25 Amps Max

  Decoupling factor DF: Greater than 21 dB

  Decoupling factor DR: Greater than 30 dB

  Dimensions: W x D x H: 665 mm x 120 mm x 105 mm

  Frequency Range: 30 MHz to 1000 MHz

  Isolated lines under test: Power supply lines and other connecting lines

  Max. Cable Diameter: 20 mm inner (10 mm with adapter)

  Maximum Continuous Power: 10 Watts

  Min. site attenuation: 13 dB to 22 dB

  RF Connector: BNC, 50 Ω

  Standards Met: CISPR 13, CISPR 14-1, CISPR 16-1-5, CISPR 16-2-2

  Inquire for Lead Time

  View Product Cart

• 

  3ctest D1550 Stripline for ISO 11452-5 Road Vehicles, 50Ω

  SKU: sku-562

  Connector type: N 50 Ω

  Dimensions: 4.30 x 1.5x 1.05 m, .95 m table height

  Distance between the plates: 150 mm

  Frequency range: 0 GHz - 1 GHz

  Max. input power: 1000 W

  Standards Met: ISO 11452-5

  Stripline: Conform with ISO 11452-5

  Typical impedance: 50 Ω

  Typical VSWR (30 - 1000 MHz): Better than 1.22

  View Product Cart

• 

  Teseq MDS 21B EMC Absorbing Clamp for Disturbance Power Measuring, w/ 6 dB Attenuator & RF Cable

  SKU: sku-559

  Weight: approx. 6.3 kg

  Current Rating: 30 A

  Dimensions: 610 mm x 115 mm x 80 mm

  Frequency Range: 30 MHz to 1000 MHz

  Impedance: 50 Ω

  RF Connector: N, female

  View Product Cart

• 

  EM Test PFS 503N32 Power Fail Simulator, 3-phase 3x480V AC (p-p) max. 32A

  SKU: sku-549

  Weight: app. 28kg;

  Current Rating: Max. 32A

  Dimensions: 19"/6 HU

  Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Frequency: 50Hz/60Hz, Single phase application

  Output: 3-phase application L1, L2, L3, N and PE on the rear panel. 1-phase application L, N and PE on the front panel

  Peak current: Better than 500A

  Repetition rate: 0.01s to 9,999s

  Rise time: Between 1us and 5us for abrupt changes, generator loaded with resistive load

  Supply Voltage: 115V/230V; +10/-15%

  Test Voltage: 3x480V AC resp. 3x690V AC (L-L) 277V AC resp. 400V AC 360V DC resp. 600V DC (L-N)

  Trigger of bursts: Automatic

  View Product Cart

• 

  Amplifier Research 40AD1 DC - 1MHz RF Power Amplifier

  SKU: 4272

  Output Power: ~50 Watts

  Frequency Range: DC - 1 MHz

  Applications: Radiated Immunity

  Max. Gain: 45 dB minimum

  Input for Rated Output: 1.0 milliwatt maximum

  Input Impedance: 50Ω; VSWR 1.5:1 maximum

  Output Impedance: 50Ω; VSWR 2.0:1 maximum

  Inquire for Availability

  View Product Cart

• 

  Keysight N5183A Microwave Analog Signal Generator

  SKU: KEY-N5183A

  Frequency Range: 100 kHz - 20, 32 or 40 GHz

  Options: Mechanical attenuator, fast switching speed

  Includes: 2.92mm Adapter, Power Cord, Calibration

  Frequency Resolution (0.01Hz): -107dBc/Hz at 20kHz offset from 3GHz carrier

  Interfaces: GPIB, LAN, USB and others

  Cost New:

  Was:

  Price Now:

  $1,250.00

  Multiple Configurations In Stock

  Ordering Options

• 

  Used Amplifier Research AR 25A250AM6 1-300 MHz, 25 Watt RF Power Amplifier

  SKU: sku-529

  Weight: 35 LBs

  Dimensions: 19.8 x 6.1 x 11.80 in

  Flatness: ± 1.5 dB

  Frequency Range: 10 kHz - 250 MHz instantaneously

  Gain: High Range: 61 dB; Low Range: 47 dB

  Impedance: 50 ohms

  Input: 90-135/180-270 VAC 47 to 63 Hz, single phase 200 watts maximum

  Output: Power output @ 3dB compression Nominal 32 watts Minimum 25 watts Power output @ 1 dB compression Nominal 20 watts Minimum 15 watts

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  View Product Cart