(Showing 12 of 1980)
Show 12 24 36 48 96

Categories

EMC Test Equipment
EMC Test Equipment
EMI Test Setup
EMI Test Setup
EMC Standards
EMC Standards
Application/Test Type
Application/Test Type
Shielded Enclosures
Shielded Enclosures
RF Test Equipment
RF Test Equipment
Electronic Test Equipment
Electronic Test Equipment
Antenna Pattern Measurement Equipment
Antenna Pattern Measurement Equipment
Anechoic Chamber Materials
Anechoic Chamber Materials
Software for EMC Testing
Software for EMC Testing
Top Manufacturers
Top Manufacturers
Clearance
Clearance
EMC Test Systems

Test Equipment, Systems & Solutions

  • PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz

    PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz

    SKU: sku-611

    Weight: 450 g
    Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
    Battery: 2 ea. AA type, re-chargeable batteries
    Dimensions: 96x64x465 mm
    Frequency Range: varies on probe
    Operation Time: 8 hours (typical)
    Probe Holder Tip: BNC
    Recharging Time: re-charged via supplied charger
    RF Field Probes: E-Field
    Standards Met: IEC/EN 61000-4-3
    View Product Cart
  • Amplifier Research 20S1G4 Solid State RF Amplifier

    Amplifier Research 20S1G4 Solid State RF Amplifier

    SKU: sku-610

    Weight: 37 lbs
    Dimensions: 19.8 x 6.1 x 14.8 in
    Flatness: ± 1.5 dB
    Frequency Range: 0.7–4.2GHz instantaneously
    Gain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimum
    Harmonic Distortion (THD): Minus 20 dBc maximum at 15 watts
    Impedance: 50 ohms, VSWR 2.0:1 maximum
    Input: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximum
    Output: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 watts
    RF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    Standards Met: CE Mark Testing
    Call for availability
    View Product Cart
  • Com-Power LI-3P-1100 150 kHz - 30 MHz Three-Phase Line Impedance Stabilization Network

    Com-Power LI-3P-1100 150 kHz - 30 MHz Three-Phase Line Impedance Stabilization Network

    SKU: sku-600

    Weight: 71.5 lbs
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 100 Amperes
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    View Product Cart
  • Com-Power LI-3P-163 150kHz - 30MHz Three-Phase Line Impedance Stabilization Network

    Com-Power LI-3P-163 150kHz - 30MHz Three-Phase Line Impedance Stabilization Network

    SKU: sku-599

    Weight: 52.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 63 Amperes
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    View Product Cart
  • Com-Power LI-3P-116 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

    Com-Power LI-3P-116 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

    SKU: sku-597

    Weight: 27.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 16 Amperes
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    CISPR 16-1-2: Yes
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: Yes
    $395.00
    Ordering Options
  • 3ctest MFS Series Magnetic Field Simulator for IEC 61000-4-8

    3ctest MFS Series Magnetic Field Simulator for IEC 61000-4-8

    SKU: sku-594

    Weight: Approx. 35Kg+68Kg
    Coil Factor: 1000 x 1000mm
    CRO Trigger: Automatic, manual or external signal trigger
    Dimensions: 19 inch/6U/4U
    Magnetic Field Strength: varies per coil: TCXS111 single turn1m*1m square coil: 1-100A/m continuous, 100-400A/m(1-10 short time) TCXS113three-turn 1m*1m square coil: 1-300A/m continuous, 300-1200A/m 1~10s short time
    Max input power: 100W
    Output Current: 50Hz/60Hz sine wave +/- 5%
    Repetition time: 1-9999s
    Standards Met: IEC/EN 61000-4-8, GB/T 17626.8
    Test duration: 1-28800s
    Generic Standards: IEC 61000-6-1, IEC 61000-6-2
    6-8 Weeks
    View Product Cart
  • 3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

    3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

    SKU: sku-591

    Weight: 40Kg
    Communication: Ethernet LAN、RJ45
    Coupling: BNC
    Dimensions: 19 inch/6U
    Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
    Frequency: 45-65Hz
    General Data: Technical Details
    Input: BNC,5V TTL
    Mains & EUT Connections: 4mm banana line
    Maximum Continuous Power: 100W
    Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s
    Peak inrush current capability: 500 Amps
    Phase synchronization: 0°- 360°，1° step or random
    Repetition time: 0.3-9999 cycle or 5ms-9999ms
    Rise time: 1-5us（100Ω load）
    Supply Voltage: 110V/220V, ±10%, 50/60Hz
    Test duration: 50ms-50000ms
    Test Voltage: 250V AC，300V DC
    Trigger: BNC,5V TTL
    View Product Cart
  • 3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

    3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

    SKU: sku-590

    Mains & EUT Connections: 4mm banana line
    Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s
    Peak inrush current capability: 500 Amps
    Rise time: 1-5us（100Ω load）
    Test duration: 50ms-50000ms
    Test Voltage: 250V AC，300V DC
    Trigger: BNC,5V TTL
    Inquire for Availability
    View Product Cart
  • 3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

    3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

    SKU: sku-588

    Test voltage: Voltage drop: 1V max@30A
    Weight: 20 kg
    Dimensions: 19" / 4 U
    Output: DUT voltage monitoring output: BNC，10:1 coaxial terminal output DUT current monitoring output: BNC，10A:1V coaxial terminal output
    Peak current: 60A duration time 500 ms
    Pulse duration: Drop duration time td 1us - 10 s
    Repetition rate: 100 ms - 999s
    Source Impedance: High resistance or low resistance
    Test Voltage: 0–60 V
    Trigger: External trigger signal by oscilloscope, BNC,5V TTL
    Trigger of bursts: Automatic, manual, external
    View Product Cart
  • Amplifier Research (AR) 40WD1000, DC - 1000 MHz RF Power Amplifier, 40 Watt CW

    Amplifier Research (AR) 40WD1000, DC - 1000 MHz RF Power Amplifier, 40 Watt CW

    SKU: sku-587

    Weight: 64 lb
    Communication: Remote control: 25 Pin Subminiature D on rear panel
    Dimensions: 19.8 x 9.8 x 18.0 in
    Flatness: ±1.0 dB typical ±1.5 dB maximum
    Frequency Range: DC-1000 MHz
    Gain: 47 dB minimum
    Impedance: INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum OUTPUT IMPEDANCE: 50 ohms, nominal
    Input: 90 to 132; 180 to 264 VAC 50/60 Hz, single phase 700 watts maximum
    Output: 40 watts minimum
    RF Connector: Type N female on front panel
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form